IPoA
Figure 37
the ATM interface and configure a WAN connection using the ATM interface.
The following table describes the labels in this screen.
Table 17 WAN Configuration: IPoA
LABEL
WAN IP Address
WAN Subnet
Mask
Back
Next
5.5.1.4 NAT, IGMP Multicast and Firewall Activation
The screen is available only when you select IP over Ethernet in the WAN
Service Configuration screen or set the DSL link type to IPoA for the ATM
interface and configure a WAN connection using the ATM interface.
Figure 38 WAN Configuration: NAT, IGMP Multicast and Firewall Activation: IPoE/
IPoA
P-870HN-51b User's Guide
This screen displays only when you set the DSL link type to IPoA for
DESCRIPTION
Enter the static IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Click this button to return to the previous screen.
Click this button to continue.
Chapter 5 WAN Setup
81