ZyXEL Communications P-870HN-51B - V1.0 Manual page 235

To change your ZyXEL Device's log settings, click Maintenance > Logs > Log
Settings. The screen appears as shown.
Figure 132 Maintenance > Logs > Log Settings
The following table describes the fields in this screen.
Table 86 Maintenance > Logs > Log Settings
LABEL
Active
Log Level
Mode
Syslog Server
IP Address
Syslog Server
UDP Port
Apply
P-870HN-51b User's Guide
DESCRIPTION
Select to enable or disable system logging.
Select the severity level of the logs that you want the ZyXEL Device to
display, record and send to the log server.
The ZyXEL Device displays and records the logs with the severity level
equal to or higher than what you selected.
Select Local to record the logs and store them in the local memory of the
ZyXEL Device only.
Select Remote to send logs to the specified log server.
Select Both to record the logs and store them in the local memory and
also send logs to the log server.
Enter the server name or the IP address of the log server.
Enter the UDP port of the log server.
Click Apply to save your customized settings.
Chapter 22 Logs
235