The Port Forwarding Edit Screen - ZyXEL Communications P-870HN-51B - V1.0 Manual

Chapter 8 Network Address Translation (NAT)
Table 37 NAT Port Forwarding (continued)
LABEL
Internal Start
Port
Internal End
Port
Server IP
Address
Modify
Apply
Cancel

8.3.1 The Port Forwarding Edit Screen

This screen lets you create or edit a port forwarding rule. Select User Define in
the Service Name field or click the rule's Edit icon in the Port Forwarding
screen to open the following screen.
Figure 68 Port Forwarding Edit
136
DESCRIPTION
This is the first internal port number that identifies a service.
This is the last internal port number that identifies a service.
This field displays the inside IP address of the server.
Click the Edit icon to go to the screen where you can edit the port
forwarding rule.
Click the Remove icon to delete an existing port forwarding rule. Note
that subsequent rules move up by one when you take this action.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to return to the previous configuration.
P-870HN-51b User's Guide