Chapter 23 Tools
If the upload was not successful, the following screen will appear. Click Tools >
Configuration to go back to the Configuration screen.
Figure 140 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the ZyXEL Device to its factory defaults. The following warning screen
appears.
Figure 141 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your ZyXEL Device. Refer to
information on the RESET button.
23.4 The Restart Screen
System restart allows you to reboot the ZyXEL Device without turning the power
off.
242
Section 1.6 on page 25
P-870HN-51b User's Guide
for more