ZyXEL Communications P-870HN-51B - V1.0 Manual page 225

The following table describes the fields in this screen.
Table 82 Interface Grouping Criteria
LABEL
Source MAC
Address
DHCP Option 60
DHCP Option 61
IAID
DUID Type
Hardware
type
Time
Link-layer
address
Enterprise
number
Identifier
DUID
DHCP Option 125 Select this and enter vendor specific information of the matched
Enterprise
number
Manufacturer
OUI
Product Class
Model Name
Serial
Number
Back
Apply
P-870HN-51b User's Guide
DESCRIPTION
Enter the source MAC address of the packet.
Select this option and enter the Vendor Class Identifier (Option 60) of
the matched traffic, such as the type of the hardware or firmware.
Select this and enter the device identity of the matched traffic.
Enter the Identity Association Identifier (IAID) of the device, for
example, the WAN connection index number.
Select DUID-LLT (DUID Based on Link-layer Address Plus Time) to
enter the hardware type, a time value and the MAC address of the
device.
Select DUID-EN (DUID Assigned by Vendor Based upon Enterprise
Number) to enter the vendor's registered enterprise number.
Select DUID-LL (DUID Based on Link-layer Address) to enter the
device's hardware type and hardware address (MAC address) in the
following fields.
Select Other to enter any string that identifies the device in the DUID
field.
Enter the 16-bit hardware type of the device from which the traffic
comes. For example, Ethernet is 1 and Experimental Ethernet is 2.
Enter the time (in seconds since midnight (UTC), January 1, 2000) the
DUID is generated.
Enter the MAC address of the device.
Enter the vendor's 32-bit enterprise number registered with the IANA
(Internet Assigned Numbers Authority).
Enter a unique identifier assigned by the vendor.
Enter the DHCP Unique Identifier (DUID) of the device.
traffic.
Enter the vendor's 32-bit enterprise number registered with the IANA
(Internet Assigned Numbers Authority).
Specify the vendor's OUI (Organization Unique Identifier). It is usually
the first three bytes of the MAC address.
Enter the product class of the device.
Enter the model name of the device.
Enter the serial number of the device.
Click this button to return to the previous screen without saving any
changes.
Click this button to save your settings back to the ZyXEL Device.
Chapter 20 Interface Group
225