Chapter 17 Tools
17.2 The Firmware Upgrade Screen
Click Maintenance > Tools to open the Firmware screen. Follow the instructions in this
screen to upload firmware to your ZyXEL Device. The upload process uses HTTP (Hypertext
Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot.
Do NOT turn off the ZyXEL Device while firmware upload is in progress!
Figure 88 Maintenance > Tools > Firmware
The following table describes the labels in this screen.
Table 50 Maintenance > Tools > Firmware
LABEL
Current
Firmware
Version
File Path
Browse...
Upload
After you see the Firmware Upload in Progress screen, wait two minutes before logging into
the ZyXEL Device again.
150
DESCRIPTION
This is the present Firmware version and the date created.
Type in the location of the file you want to upload in this field or click Browse ... to
find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
P-870HW-51a v2 User's Guide