Figure 51 Wireless: Wpa-Psk/Wpa2-Psk; Table 30 Wireless: Wpa-Psk/Wpa2-Psk - ZyXEL Communications P-660HW-T - V2 User Manual

P-660HW-T v2 User's Guide

Figure 51 Wireless: WPA-PSK/WPA2-PSK

The following table describes the wireless LAN security labels in this screen.

Table 30 Wireless: WPA-PSK/WPA2-PSK

LABEL
Security Mode
WPA Compatible
Pre-Shared Key
ReAuthentication
Timer (In
Seconds)
100
DESCRIPTION
Choose WPA-PSK or WPA2-PSK from the drop-down list box.
This check box is available only when you select WPA2-PSK or WPA2 in the
Security Mode field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the ZyXEL Device even when the ZyXEL Device is using
WPA2-PSK or WPA2.
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
Specify how often wireless clients have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds. The
default time interval is 1800 seconds (30 minutes).
Note: If wireless client authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
Chapter 6 Wireless LAN