Wireless Security: Wpa-Psk/Wpa2-Psk - ZyXEL Communications NVG2053 User Manual

3.5.2 Wireless Security: WPA-PSK/WPA2-PSK

Choose WPA-PSK or WPA2-PSK security in the Wireless Security screen to set
up a password for your wireless network.
Figure 14 Wireless Security: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 7 Wireless Security: WPA-PSK/WPA2-PSK
LABEL
Wireless
Network
Name
(SSID)
Security
mode
Wireless
password
Verify
Password
Exit
Back
Next
Congratulations! Open a web browser, such as Internet Explorer, to visit your
favorite website.
NVG2053 User's Guide
DESCRIPTION
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the NVG2053, make sure all wireless stations
use the same SSID in order to access the network.
Choose WPA-PSK or WPA2-PSK security to configure a Pre-Shared Key.
Choose this option only if your wireless clients support WPA-PSK or WPA2-
PSK respectively.
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most
secure wireless connection by configuring WPA in the wireless LAN screens.
Retype the password to confirm.
Click this to close the wizard screen without saving.
Click this to return to the previous screen.
Click this to continue.
Chapter 3 Connection Wizard
57