Restore Configuration; Figure 141 Configuration Restore Successful; Figure 142 Temporarily Disconnected; Table 110 Maintenance Restore Configuration - ZyXEL Communications P-660HW-T - V2 User Manual

P-660HW-T v2 User's Guide

19.2.2 Restore Configuration

Restore configuration allows you to upload a new or previously saved configuration file from
your computer to your ZyXEL Device.

Table 110 Maintenance Restore Configuration

LABEL
File Path
Browse...
Upload
Note: Do not turn off the ZyXEL Device while configuration file upload is in progress
After you see a "Restore Configuration successful" screen, you must then wait one minute
before logging into the ZyXEL Device again.

Figure 141 Configuration Restore Successful

The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 142 Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default ZyXEL Device IP address
(192.168.1.1). See the appendix for details on how to set up your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
248
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find
it.
Click Browse... to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Click Upload to begin the upload process.
Chapter 19 Tools