Wpa-Psk/Wpa2-Psk - ZyXEL Communications EMG2926-Q10A User Manual

Table 20 Network > Wireless LAN 2.4G/5G > General: Static WEP (continued)
LABEL
ASCII
Hex
Key 1 to Key 4
Apply
Cancel

9.3.3 WPA-PSK/WPA2-PSK

Select WPA-PSK or WPA2-PSK from the Security Mode list.
Figure 36 Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK
Chapter 9 Wireless LAN
DESCRIPTION
Select this option in order to enter ASCII characters as WEP key.
Select this option in order to enter hexadecimal characters as a WEP key.
The preceding "0x", that identifies a hexadecimal key, is entered automatically.
The WEP keys are used to encrypt data. Both the EMG2926-Q10A and the wireless
stations must use the same WEP key for data transmission.
If you chose 64-bits, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
If you chose 128-bits, then enter 13 ASCII characters or 26 hexadecimal characters ("0-
9", "A-F").
You must configure at least one key, only one key can be activated at any one time. The
default key is key 1.
Click Apply to save your changes back to the EMG2926-Q10A.
Click Cancel to reload the previous configuration for this screen.
EMG2926-Q10A User's Guide
76