Rule Configuration; Figure 104 Bandwidth Management Rule Configuration; Table 73 Bandwidth Management Rule Configuration - ZyXEL Communications P-660HW-T - V2 User Manual

13.9.1 Rule Configuration

Click the Edit icon or select User Defined from the Service drop-down list in the Rule Setup
screen to configure a bandwidth management rule. Use bandwidth rules to allocate specific
amounts of bandwidth capacity (bandwidth budgets) to specific applications and/or subnets.

Figure 104 Bandwidth Management Rule Configuration

The following table describes the labels in this screen.

Table 73 Bandwidth Management Rule Configuration

LABEL
Rule Configuration
Active
Rule Name
BW Budget
Priority
Chapter 13 Bandwidth Management
DESCRIPTION
Select this check box to have the ZyXEL Device apply this bandwidth
management rule.
Enable a bandwidth management rule to give traffic that matches the rule priority
over traffic that does not match the rule.
Enabling a bandwidth management rule also allows you to control the maximum
amounts of bandwidth that can be used by traffic that matches the rule.
Use the auto-generated name or enter a descriptive name of up to 20
alphanumeric characters, including spaces.
Specify the maximum bandwidth allowed for the rule in kbps. The
recommendation is a setting between 20 kbps and 20000 kbps for an individual
rule.
Select a priority from the drop down list box. Choose High, Mid or Low.
P-660HW-T v2 User's Guide
187