Firewall Configuration; Chapter 10 Firewall Configuration; Access Methods; Firewall Policies Overview - ZyXEL Communications P-660HW-T - V2 User Manual

This chapter shows you how to enable and configure the ZyXEL Device firewall.

10.1 Access Methods

The web configurator is, by far, the most comprehensive firewall configuration tool your
ZyXEL Device has to offer. For this reason, it is recommended that you configure your
firewall using the web configurator.CLI (Command Line Interpreter) commands provide
limited configuration options and are only recommended for advanced users.

10.2 Firewall Policies Overview

Firewall rules are grouped based on the direction of travel of packets to which they apply:
• LAN to LAN/ Router
• LAN to WAN
Note: The LAN includes both the LAN port and the WLAN.
By default, the ZyXEL Device's stateful packet inspection allows packets traveling in the
following directions:
• LAN to LAN/ Router
This allows computers on the LAN to manage the ZyXEL Device and communicate
between networks or subnets connected to the LAN interface.
• LAN to WAN
By default, the ZyXEL Device's stateful packet inspection drops packets traveling in the
following directions:
• WAN to LAN
• WAN to WAN/ Router
This prevents computers on the WAN from using the ZyXEL Device as a gateway to
communicate with other computers on the WAN and/or managing the ZyXEL Device.
You may define additional rules and sets or modify existing ones but please exercise
extreme caution in doing so.

Chapter 10 Firewall Configuration

C

Firewall Configuration

• WAN to LAN
• WAN to WAN/ Router
P-660HW-T v2 User's Guide
H A P T E R
1 0
149