Figure 22 Internet Connection With Enet Encap; Table 10 Internet Connection With Rfc 1483; Table 11 Internet Connection With Enet Encap - ZyXEL Communications P-660HW-T - V2 User Manual

P-660HW-T v2 User's Guide
The following table describes the fields in this screen.

Table 10 Internet Connection with RFC 1483

LABEL
IP Address
Back
Next
Exit

Figure 22 Internet Connection with ENET ENCAP

The following table describes the fields in this screen.

Table 11 Internet Connection with ENET ENCAP

LABEL
Obtain an IP
Address
Automatically
Static IP
Address
IP Address
Subnet Mask
Gateway IP
address
First DNS
Server
60
DESCRIPTION
This field is available if you select Routing in the Mode field.
Type your ISP assigned IP address in this field.
Click Back to go back to the previous wizard screen.
Click Next to continue to the next wizard screen.
Click Exit to close the wizard screen without saving your changes.
DESCRIPTION
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address.
Select Static IP Address if your ISP gives you a fixed IP address.
Enter your ISP assigned IP address.
Enter a subnet mask in dotted decimal notation.
Refer to the appendices to calculate a subnet mask If you are implementing subnetting.
You must specify a gateway IP address (supplied by your ISP) when you use ENET
ENCAP in the Encapsulation field in the previous screen.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP
clients along with the IP address and the subnet mask.
Chapter 3 Wizard Setup for Internet Access