Dynamic Wep Key Exchange; Wpa And Wpa2; Table 148 Comparison Of Eap Authentication Types - ZyXEL Communications P-660HW-T - V2 User Manual

802.11g wireless adsl 2+ 4-port gateway
Hide thumbs Also See for P-660HW-T - V2:
Table of Contents

Advertisement

Dynamic WEP Key Exchange

The AP maps a unique key that is generated with the RADIUS server. This key expires when
the wireless connection times out, disconnects or reauthentication times out. A new WEP key
is generated each time reauthentication is performed.
If this feature is enabled, it is not necessary to configure a default encryption key in the
Wireless screen. You may still configure and store keys here, but they will not be used while
Dynamic WEP is enabled.
Note: EAP-MD5 cannot be used with Dynamic WEP Key Exchange
For added security, certificate-based authentications (EAP-TLS, EAP-TTLS and PEAP) use
dynamic keys for data encryption. They are often deployed in corporate environments, but for
public deployment, a simple user name and password pair is more practical. The following
table is a comparison of the features of authentication types.

Table 148 Comparison of EAP Authentication Types

Mutual Authentication
Certificate – Client
Certificate – Server
Dynamic Key Exchange
Credential Integrity
Deployment Difficulty
Client Identity Protection

WPA and WPA2

Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i standard. WPA2 (IEEE
802.11i) is a wireless security standard that defines stronger encryption, authentication and
key management than WPA.
Key differences between WPA or WPA2 and WEP are improved data encryption and user
authentication.
If both an AP and the wireless clients support WPA2 and you have an external RADIUS
server, use WPA2 for stronger data encryption. If you don't have an external RADIUS server,
you should use WPA2-PSK (WPA2-Pre-Shared Key) that only requires a single (identical)
password entered into each access point, wireless gateway and wireless client. As long as the
passwords match, a wireless client will be granted access to a WLAN.
If the AP or the wireless clients do not support WPA2, just use WPA or WPA-PSK depending
on whether you have an external RADIUS server or not.
Appendix K Wireless LANs
EAP-MD5
EAP-TLS
No
Yes
No
Yes
No
Yes
No
Yes
None
Strong
Easy
Hard
No
No
P-660HW-T v2 User's Guide
EAP-TTLS
PEAP
Yes
Yes
Optional
Optional
Yes
Yes
Yes
Yes
Strong
Strong
Moderate
Moderate
Yes
Yes
LEAP
Yes
No
No
Yes
Moderate
Moderate
No
329

Advertisement

Table of Contents
loading

Table of Contents