Figure 28 Wireless Lan Setup Wizard 2; Table 13 Wireless Lan Setup Wizard 1 - ZyXEL Communications P-660HW-T - V2 User Manual

P-660HW-T v2 User's Guide
The following table describes the labels in this screen.

Table 13 Wireless LAN Setup Wizard 1

LABEL
Active
Enable OTIST
Setup Key
Back
Next
Exit
3 Configure your wireless settings in this screen. Click Next.

Figure 28 Wireless LAN Setup Wizard 2

64
DESCRIPTION
Select the check box to turn on the wireless LAN.
Select the check box to enable OTIST if you want to transfer your ZyXEL
Device's SSID and WPA-PSK security settings to wireless clients that support
OTIST and are within transmission range.
You must also activate and start OTIST on the wireless client at the same time.
The process takes three minutes to complete.
Note: Enable OTIST only if your wireless clients support WPA
and OTIST.
Type an OTIST Setup Key of up to eight ASCII characters in length. Be sure to
use the same OTIST Setup Key on the ZyXEL Device and wireless clients.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
Chapter 3 Wizard Setup for Internet Access