Figure 6-11 Wireless Lan: 802.1X/Wpa For Wpa-Psk Protocol; Table 6-7 Wireless Lan: 802.1X/Wpa For Wpa-Psk Protocol - ZyXEL Communications Prestige 660W Series User Manual

Figure 6-11 Wireless LAN: 802.1x/WPA for WPA-PSK Protocol

The following table describes the labels not previously discussed

Table 6-7 Wireless LAN: 802.1x/WPA for WPA-PSK Protocol

LABEL
Key Management Choose WPA-PSK in this field.
Protocol
Pre-Shared Key The encryption mechanisms used for WPA and WPA-PSK are the same. The only
difference between the two is that WPA-PSK uses a simple common password,
instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
WPA Mixed Mode The Prestige can operate in WPA Mixed Mode, which supports both clients running
WPA and clients running dynamic WEP key exchange with 802.1x in the same Wi-Fi
network.
Select the check box to activate WPA mixed mode. Otherwise, clear the check box
and configure the Group Data Privacy field.
Wireless LAN Setup
Prestige 660W/HW Series User's Guide
DESCRIPTION
6-21