Remote Management And Nat; System Timeout; Www; Figure 107 Remote Management: Www - ZyXEL Communications P-660HW-T - V2 User Manual

P-660HW-T v2 User's Guide
• The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the ZyXEL Device will disconnect the session immediately.
• There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
• There is a firewall rule that blocks it.

15.1.2 Remote Management and NAT

When NAT is enabled:
• Use the ZyXEL Device's WAN IP address when configuring from the WAN.
• Use the ZyXEL Device's LAN IP address when configuring from the LAN.

15.1.3 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The ZyXEL Device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when a statistics
screen is polling.

15.2 WWW

To change your ZyXEL Device's World Wide Web settings, click Advanced > Remote
MGMT to display the WWW screen.

Figure 107 Remote Management: WWW

196 Chapter 15 Remote Management Configuration