Configuring Firewall Rules - ZyXEL Communications P-660HW-T - V2 User Manual

Table 53 Firewall Rules (continued)
LABEL
Action
Schedule
Log
Modify
Order
Apply
Cancel

10.6.1 Configuring Firewall Rules

Refer to Section 9.1 on page 137
In the Rules screen, select an index number and click Add or click a rule's Edit icon to display
this screen and refer to the following table for information on the labels.
Chapter 10 Firewall Configuration
DESCRIPTION
This field displays whether the firewall silently discards packets (Drop), discards
packets and sends a TCP reset packet or an ICMP destination-unreachable
message to the sender (Reject) or allows the passage of packets (Permit)
This field tells you whether a schedule is specified (Yes) or not (No).
This field shows you whether a log is created when packets match this rule (Yes) or
not (No).
Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing firewall rule. A window displays asking
you to confirm that you want to delete the firewall rule. Note that subsequent firewall
rules move up by one when you take this action.
Click the Move icon to display the Move the rule to field. Type a number in the Move
the rule to field and click the Move button to move the rule to the number that you
typed. The ordering of your rules is important as they are applied in order of their
numbering.
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
for more information.
P-660HW-T v2 User's Guide
155