To change your ZyXEL Device's MAC filter settings, click Network > Wireless LAN >
MAC Filter. The screen appears as shown.
Figure 61 MAC Address Filter
The following table describes the labels in this menu.
Table 34 MAC Address Filter
LABEL
Active MAC
Filter
Filter Action
Set
MAC Address Enter the MAC addresses of the wireless client that are allowed or denied access to the
Chapter 6 Wireless LAN
DESCRIPTION
Select the check box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed will be
allowed to access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device, MAC addresses not listed will be
denied access to the ZyXEL Device.
This is the index number of the MAC address.
ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
P-660HW-T v2 User's Guide
109