Dhcp Setup; Figure 66 Dhcp Setup; Table 37 Dhcp Setup - ZyXEL Communications P-660HW-T - V2 User Manual

7.4 DHCP Setup

Use this screen to configure the DNS server information that the ZyXEL Device sends to the
DHCP client devices on the LAN.

Figure 66 DHCP Setup

The following table describes the labels in this screen.

Table 37 DHCP Setup

LABEL
DHCP Setup
DHCP
IP Pool Starting
Address
Pool Size
Remote DHCP
Server
DNS Server
DNS Servers
Assigned by DHCP
Server
Chapter 7 LAN Setup
DESCRIPTION
If set to Server, your ZyXEL Device can assign IP addresses, an IP default
gateway and DNS servers to Windows 95, Windows NT and other systems that
support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the clients.
Enter the IP address of the actual, remote DHCP server in the Remote DHCP
Server field in this case.
When DHCP is used, the following items need to be set:
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size, or count of the IP address pool.
If Relay is selected in the DHCP field above then enter the IP address of the
actual remote DHCP server here.
The ZyXEL Device passes a DNS (Domain Name System) server IP address to
the DHCP clients.
P-660HW-T v2 User's Guide
119