Figure 31 Wireless Lan Setup 3; Table 16 Manually Assign A Wep Key - ZyXEL Communications P-660HW-T - V2 User Manual

The following table describes the labels in this screen.

Table 16 Manually assign a WEP key

LABEL
Key
Back
Next
Exit
5 Click Apply to save your wireless LAN settings.

Figure 31 Wireless LAN Setup 3

6 Use the read-only summary table to check whether what you have configured is correct.
Click Finish to complete and save the wizard setup.
Chapter 3 Wizard Setup for Internet Access
DESCRIPTION
The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
Enter any 5, 13 or 29 ASCII characters or 10, 26 or 58 hexadecimal characters ("0-9",
"A-F") for a 64-bit, 128-bit or 256-bit WEP key respectively.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
P-660HW-T v2 User's Guide
67