P-660HW-Tx v3 Overview The P-660HW-Tx v3 is an ADSL router with a four-port built-in Ethernet switch and IEEE 802.11b/g wireless capability. The P-660HW-Tx v3 allows wired and wireless clients to safely access the Internet. See your User’s Guide for background information on all features.
1. DSL: Use a telephone wire to connect your P-660HW-Tx v3’s DSL port to a telephone jack (or to a splitter, if one is already installed). 2. LAN: Use an Ethernet cable to connect a computer to a LAN port for initial configuration and/or Internet access.
Page 5
P-660HW-Tx v3 2. Enter the default password user to go directly to the Status screen. 3. See the User’s Guide for field descriptions of the Status screen. Internet and Wireless Setup 1. Open your web browser, and go to http://www.zyxel.com.
Page 6
P-660HW-Tx v3 to finish detection. If any other screens appear, follow the directions in the screen. If the web page opens correctly, your P-660HW-Tx v3 is ready for you to use. If the web page does not open, follow the rest of the steps. You should have the information provided by your ISP.
2. If you cannot access the Internet when your computer is connected to the LAN port, follow these steps. a. Check the lights on the front panel. If they are different from what is described in section , make sure the P-660HW-Tx v3 is correctly...
Page 8
, follow suggestions above. If you do not, go to the next step. b. Make sure your P-660HW-Tx v3 and your computer are using the same wireless and wireless security settings. Follow the steps in section . Viewing Certification(s) •...