Figure 6-11 Wireless Lan: 802.1X/Wpa For Wpa-Psk Protocol; Table 6-7 Wireless Lan: 802.1X/Wpa For Wpa-Psk Protocol - ZyXEL Communications Prestige 662HW Series User Manual
802.11g wireless adsl 2+ 4 port security gateway
Hide thumbs
Also See for Prestige 662HW Series:
- Compact manual (39 pages) ,
- Specifications (2 pages) ,
- User manual (563 pages)
Table of Contents
Advertisement
Prestige 662HW Series User's Guide
Authentication Required: WPA-PSK
Select Authentication Required in the Wireless Port Control field and WPA-PSK in the Key
Management Protocol field to display the next screen.
Figure 6-11 Wireless LAN: 802.1x/WPA for WPA-PSK Protocol
The following table describes the labels not previously discussed
Table 6-7 Wireless LAN: 802.1x/WPA for WPA-PSK Protocol
LABEL
Key Management
Choose WPA-PSK in this field.
Protocol
Pre-Shared Key
The encryption mechanisms used for WPA and WPA-PSK are the same. The only
difference between the two is that WPA-PSK uses a simple common password, instead
of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including spaces
and symbols).
WPA Mixed Mode
The Prestige can operate in WPA Mixed Mode, which supports both clients running
WPA and clients running dynamic WEP key exchange with 802.1x in the same Wi-Fi
network.
Select the check box to activate WPA mixed mode. Otherwise, clear the check box and
configure the Group Data Privacy field.
Group Data
Group Data Privacy allows you to choose TKIP (recommended) or WEP for broadcast
Privacy
and multicast ("group") traffic if the Key Management Protocol is WPA and WPA
Mixed Mode is disabled. WEP is used automatically if you have enabled WPA Mixed
Mode.
All unicast traffic is automatically encrypted by TKIP when WPA or WPA-PSK Key
Management Protocol is selected.
Authentication
This field is only visible when WPA Mixed Mode is enabled.
Databases
6-16
DESCRIPTION
Wireless LAN Setup
Advertisement
Table of Contents
