Lan Ip Alias; Table 38 Lan Client List - ZyXEL Communications P-660HW-T - V2 User Manual

The following table describes the labels in this screen.

Table 38 LAN Client List

LABEL
IP Address
MAC Address
Add
#
Status
Host Name
IP Address
MAC Address
Reserve
Modify
Apply
Cancel
Refresh

7.6 LAN IP Alias

IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. The ZyXEL Device supports three logical LAN interfaces via its
single physical Ethernet interface with the ZyXEL Device itself as the gateway for each LAN
network.
When you use IP alias, you can also configure firewall rules to control access between the
LAN's logical networks (subnets).
Note: Make sure that the subnets of the logical networks do not overlap.
The following figure shows a LAN divided into subnets A, B, and C.
Chapter 7 LAN Setup
DESCRIPTION
Enter the IP address that you want to assign to the computer on your LAN with the
MAC address specified below.
The IP address should be within the range of IP addresses you specified in the
DHCP Setup for the DHCP client.
Enter the MAC address of a computer on your LAN.
Click Add to add a static DHCP entry.
This is the index number of the static IP table entry (row).
This field displays whether the client is connected to the ZyXEL Device.
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
The MAC (Media Access Control) or Ethernet address on a LAN (Local Area
Network) is unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address
that is assigned at the factory. This address follows an industry standard that
ensures no other adapter has a similar address.
Select the check box(es) in each entry to have the ZyXEL Device always assign
the selected entry(ies)'s IP address(es) to the corresponding MAC address(es)
(and host name(s)). You can select up to 32 entries in this table.
Click the modify icon to have the IP address field editable and change it.
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Click Refresh to reload the DHCP table.
P-660HW-T v2 User's Guide
121