Otist; Enabling Otist - ZyXEL Communications P-660HW-T - V2 User Manual

Table 32 Wireless LAN: Advanced
LABEL
Max. Frame
Burst
Back
Apply
Cancel

6.5 OTIST

In a wireless network, the wireless clients must have the same SSID and security settings as
the access point (AP) or wireless router (we will refer to both as "AP" here) in order to
associate with it. Traditionally this meant that you had to configure the settings on the AP and
then manually configure the exact same settings on each wireless client.
OTIST (One-Touch Intelligent Security Technology) allows you to transfer your AP's SSID
and WPA-PSK security settings to wireless clients that support OTIST and are within
transmission range. You can also choose to have OTIST generate a WPA-PSK key for you if
you didn't configure one manually.
Note: OTIST replaces the pre-configured wireless settings on the wireless clients.

6.5.1 Enabling OTIST

You must enable OTIST on both the AP and wireless client before you start transferring
settings.
Note: The AP and wireless client(s) MUST use the same Setup key.
6.5.1.1 AP
You can enable OTIST using the RESET button or the web configurator.
6.5.1.1.1 Reset button
If you use the RESET button, the default (01234567) or previous saved (through the web
configurator) Setup key is used to encrypt the settings that you want to transfer.
Hold in the RESET button for three to eight seconds.
Chapter 6 Wireless LAN
DESCRIPTION
Enable Maximum Frame Burst to help eliminate collisions in mixed-mode networks
(networks with both IEEE 802.11g and IEEE 802.11b traffic) and enhance the
performance of both pure IEEE 802.11g and mixed IEEE 802.11b/g networks.
Maximum Frame Burst sets the maximum time, in micro-seconds, that the ZZyXEL
Device transmits IEEE 802.11g wireless traffic only.
Type the maximum frame burst between 0 and 1800 (650, 1000 or 1800
recommended). Enter 0 to disable this feature.
Click Back to return to the previous screen.
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to reload the previous configuration for this screen.
P-660HW-T v2 User's Guide
105