Hardware Connection; Table 2 Front Panel Leds - ZyXEL Communications P-660HW-T - V2 User Manual

The following table describes the LEDs.

Table 2 Front Panel LEDs

LED
POWER
ETHERNET
WLAN
DSL
INTERNET

1.5 Hardware Connection

Refer to the Quick Start Guide for information on hardware connection.
Chapter 1 Getting To Know Your ZyXEL Device
COLOR STATUS DESCRIPTION
Green On The ZyXEL Device is receiving power and functioning
properly.
Blinking The ZyXEL Device is booting or performing diagnostics.
Red On Power to the ZyXEL Device is too low.
Off The system is not ready or has malfunctioned.
Green On The ZyXEL Device has a successful Ethernet connection.
Blinking The ZyXEL Device is sending/receiving data.
Off The ZyXEL Device is not connected to the LAN.
Green On The ZyXEL Device is ready, but is not sending/receiving data
through the wireless LAN.
Blinking The ZyXEL Device is sending/receiving data through the
wireless LAN.
Off The wireless LAN is not ready or has failed.
Green On The DSL line is up.
Blinking The ZyXEL Device is initializing the DSL line.
Off The DSL line is down.
Green On The Internet connection is up.
Blinking The ZyXEL Device is sending/receiving data.
Off The Internet connection is down.
P-660HW-T v2 User's Guide
39