Legacy Device Info - ZyXEL Communications NWA3000-N Series User Manual

Table 28 Monitor > Wireless > Rogue AP (continued)
LABEL
Last Seen
Refresh

6.8 Legacy Device Info

When the NWA3000-N series AP is in controller mode you can use this screen to
configure and maintain a list of compatible legacy (NWA-3000 series) APs. Use the
list to link to their Web Configurators. Click Monitor > Wireless > Rogue AP >
Legacy Device Info to access this screen.
Compatible legacy APs:
• NWA-3160
• NWA-3163
• NWA-3500
• NWA-3550
• NWA-3166
Figure 34 Monitor > Wireless > Legacy Device Info
The following table describes the labels in this screen.
Table 29 Monitor > Wireless > Legacy Device Info
LABEL
Add
Edit
Remove
Connect
NWA3000-N Series User's Guide
DESCRIPTION
This indicates the last time the device was detected by the NWA3000-N
series AP.
Click this to refresh the items displayed on this page.
DESCRIPTION
Click this to add a device to the list of legacy APs the NWA3000-N series
AP monitors.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
Select an entry and click this button to delete it from the list.
Select an entry and click this button to go to the legacy AP's Web
Configurator screens.
Chapter 6 Monitor
95