ZyXEL Communications NWA3000-N Series User Manual page 259

Note: New capture files overwrite existing files of the same name. Change the File
Suffix field's setting to avoid this.
Figure 121 Maintenance > Diagnostics > Wireless Frame Capture > Capture
The following table describes the labels in this screen.
Table 94 Maintenance > Diagnostics > Wireless Frame Capture > Capture
LABEL
AP Operating Mode
Wireless Radio 1
operating mode
Please configure
at least one radio
to MON mode.
MON Mode APs
Configure AP to
MON Mode
Available MON
Mode APs
Capture MON
Mode APs
Misc Setting
NWA3000-N Series User's Guide
DESCRIPTION
This section appears when the NWA3000-N series AP is set to the
standalone AP mode.
This field shows whether the radio is set to function as an AP or a
monitor.
Click this to go the Configuration > Wireless > AP
Management screen, where you can set a radio to monitor mode.
This section appears when the NWA3000-N series AP is set to the
controller mode.
Click this to go the Configuration > Wireless > AP
Management screen, where you can set one or more APs to
monitor mode.
This column displays which APs on your wireless network are
currently configured for monitor mode.
Use the arrow buttons to move APs off this list and onto the
Captured MON Mode APs list.
This column displays the monitor-mode configured APs selected to
for wireless frame capture.
Chapter 18 Diagnostics
259