Wds Link Info - ZyXEL Communications NWA Seres User Manual

Table 33 Monitor > Wireless > Station Info (continued)
LABEL
SSID Name
Security Mode
Signal Strength
Tx Rate
Rx Rate
Association Time
Refresh

8.6 WDS Link Info

Use this screen to view the WDS traffic statistics between the Zyxel Device and a root AP or repeaters.
See Section 1.2 on page 13
this screen.
Figure 45 Monitor > Wireless > WDS Link Info
The following table describes the labels in this screen.
Table 34 Monitor > Wireless > WDS Link Info
LABEL
WDS Uplink Info
WDS Downlink
Info
#
Chapter 8 Monitor
DESCRIPTION
This indicates the name of the wireless network to which the station is connected. A single AP
can have multiple SSIDs or networks.
This indicates which secure encryption methods is being used by the station to connect to the
network.
This is the RSSI (Received Signal Strength Indicator) of the station's wireless connection.
This is the maximum transmission rate of the station.
This is the maximum reception rate of the station.
This displays the time the station first associated with the Zyxel Device's wireless network.
Click this to refresh the items displayed on this page.
to know more about WDS. Click Monitor > Wireless > WDS Link Info to access
DESCRIPTION
Uplink refers to the WDS link from the repeaters to the root AP.
Downlink refers to the WDS link from the root AP to the repeaters.
When the Zyxel Device is in root AP mode and connected to a repeater, only the downlink
information is displayed.
When the Zyxel Device is in repeater mode and connected to a root AP directly or via another
repeater, the uplink information is displayed.
When the Zyxel Device is in repeater mode and connected to a root AP and other repeater(s),
both the uplink and downlink information would be displayed.
This is the index number of the root AP or repeater in this list.
NWA/WAC/WAX Series User's Guide
87