ZyXEL Communications NWA3000-N Series User Manual page 41

Note: To view the functions in the Web Configurator user interface that correspond
directly to specific NWA3000-N series AP CLI commands, use the CLI
Messages window (see
Figure 16 Console
The following table describes the elements in this screen.
Table 9 Console
LABEL
Command Line
Device IP
Address
Logged-In User
NWA3000-N Series User's Guide
Section 2.3.5.1 on page
DESCRIPTION
Enter commands for the device that you are currently logged into here.
If you are logged into the NWA3000-N series AP, see the CLI Reference
Guide for details on using the command line to configure it.
This is the IP address of the device that you are currently logged into.
This displays the username of the account currently logged into the
NWA3000-N series AP through the Console Window.
Note: You can log into the Web Configurator with a different account
than used to log into the NWA3000-N series AP through the
Console.
Chapter 2 The Web Configurator
40) in tandem with this one.
41