ZyXEL Communications NWA3000-N Series User Manual page 160

Wireless n business wlan 3000 series access point
Hide thumbs Also See for NWA3000-N Series:
Table of Contents

Advertisement

Chapter 12 AP Profile
Table 57 SSID > Security Profile > Add/Edit Security Profile (continued)
LABEL
Primary /
Secondary
Accounting
Server Activate
Accounting
Server IP
Address
Accounting
Server Port
Accounting
Share Secret
Reauthentication
Timer
Idle Timeout
Authentication
Type
Key Length
Key 1~4
PSK
Pre-Shared Key
160
DESCRIPTION
Select the check box to enable user accounting through an external
authentication server.
Enter the IP address of the external accounting server in dotted
decimal notation.
Enter the port number of the external accounting server. The default
port number is 1813. You need not change this value unless your
network administrator instructs you to do so with additional
information.
Enter a password (up to 128 alphanumeric characters) as the key to
be shared between the external accounting server and the NWA3000-
N series AP. The key must be the same on the external accounting
server and your NWA3000-N series AP. The key is not sent over the
network.
Enter the interval (in seconds) between authentication requests. Enter
a 0 for unlimited requests.
Enter the idle interval (in seconds) that a client can be idle before
authentication is discontinued.
Select a WEP authentication method. Choices are Open or Share key.
Share key is only available if you are not using 802.1x.
Select the bit-length of the encryption key to be used in WEP
connections.
If you select WEP-64:
Enter 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9"
(for example, 0x11AA22BB33) for each Key used.
or
Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z"
and "0-9" (for example, MyKey) for each Key used.
If you select WEP-128:
Enter 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9"
(for example, 0x00112233445566778899AABBCC) for each Key
used.
or
Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-
Z" and "0-9" (for example, MyKey12345678) for each Key used.
Based on your Key Length selection, enter the appropriate length
hexadecimal or ASCII key.
Select this option to use a Pre-Shared Key with WPA encryption.
Enter a pre-shared key of between 8 and 63 case-sensitive ASCII
characters (including spaces and symbols) or 64 hexadecimal
characters.
NWA3000-N Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nwa-3160Nwa3160-n

Table of Contents