Technical Reference - ZyXEL Communications NWA3000-N Series User Manual

The following table describes the labels in this screen.
Table 46 Device HA > Active-Passive Mode > Edit Monitored Interface
LABEL
Enable
Monitored
Interface
Interface
Name
Virtual Router
IP (VRIP) /
Subnet Mask
Manage IP
Manage IP
Subnet Mask
OK
Cancel

10.4 Technical Reference

The following section contains additional technical information about the features
described in this chapter.
Virtual Router
The master and backup NWA3000-N series AP form a single 'virtual router'. In the
following example, master NWA3000-N series AP A and backup NWA3000-N
series AP B form a virtual router.
Figure 60 Virtual Router
NWA3000-N Series User's Guide
DESCRIPTION
Select this to have device HA monitor the status of this interface's
connection.
This identifies the interface.
This is the interface's (static) IP address and subnet mask in the virtual
router. Whichever NWA3000-N series AP is currently serving as the
master uses this virtual router IP address and subnet mask. These fields
are blank if the interface is a DHCP client or has no IP settings.
Enter the interface's IP address for management access. You can use
this IP address to access the NWA3000-N series AP whether it is the
master or a backup. This management IP address should be in the same
subnet as the interface IP address.
Enter the subnet mask of the interface's management IP address.
Click OK to save your changes back to the NWA3000-N series AP.
Click Cancel to exit this screen without saving your changes.
A
B
Chapter 10 Device HA
135