Adding Or Editing A Trusted Ap Profile - ZyXEL Communications NWA3000-N Series User Manual

Chapter 15 System
Table 80 Configuration > System > Auth. Server (continued)
LABEL
Profile Name
IP Address
Mask
Description
Apply
Reset

15.10.2 Adding or Editing a Trusted AP Profile

This screen allows you to add or edit an internal RADIUS server trusted AP profile.
To access this screen, click the Configuration > System > Auth. Server
screen's Add button or select a trusted AP profile from the list and click the Edit
button.
Figure 107 Configuration > System > Auth. Server > Add
The following table describes the labels in this screen.
Table 81 Configuration > System > Auth. Server
LABEL
Activate
Profile Name
IP Address
Netmask
224
DESCRIPTION
This field indicates the name assigned to the trusted AP profile.
This field indicates the IP address of the trusted AP in dotted decimal
notation.
This field indicates the subnet mask of the trusted AP in dotted decimal
notation. The subnet mask indicates what part of the IP address is the
same for all computers in the network.
This field shows the information listed to help identify the trusted AP
profile.
Click OK to save your changes back to the NWA3000-N series AP.
Click Reset to start configuring this screen afresh.
DESCRIPTION
Select this to turn on this trusted AP profile.
Type a name for the trusted AP profile.
Type the IP address of the trusted AP in dotted decimal notation.
Type the subnet mask of the trusted AP in dotted decimal notation. The
subnet mask indicates what part of the IP address is the same for all
computers in the network.
NWA3000-N Series User's Guide