Controller - ZyXEL Communications NWA3000-N Series User Manual

Chapter 9 Wireless
Load Balancing (Wireless)
Wireless load balancing is the process where you limit the number of connections
allowed on an wireless access point (AP) or you limit the amount of wireless traffic
transmitted and received on it so the AP does not become overloaded.

9.2 Controller

Use this screen to set how the NWA3000-N series AP allows new APs to connect to
the network. This is available when the NWA3000-N series AP is in controller
mode. Click Configuration > Wireless > Controller to access this screen.
Figure 43 Configuration > Wireless > Controller
Each field is described in the following table.
Table 36 Configuration > Wireless > Controller
LABEL
Registration Type
Apply
Reset
112
DESCRIPTION
Select Manual to add each AP to the NWA3000-N series AP for
management, or Always Accept to automatically add APs to the
NWA3000-N series AP for management.
Note: Select the Manual option for managing a specific set of
APs. This is recommended as the registration mechanism
cannot automatically differentiate between friendly and
rogue APs. For details on how to handle rogue APs, see
Section 6.7 on page
APs must be connected to the NWA3000-N series AP by a wired
connection or network.
Click Apply to save your changes back to the NWA3000-N series AP.
Click Reset to return the screen to its last-saved settings.
94.
NWA3000-N Series User's Guide