ZyXEL Communications NWA3000-N Series User Manual page 180

Chapter 14 Certificates
Table 63 Configuration > Object > Certificate > My Certificates > Add (continued)
LABEL
Request
Authentication
OK
Cancel
If you configured the My Certificate Create screen to have the NWA3000-N
series AP enroll a certificate and the certificate enrollment is not successful, you
see a screen with a Return button that takes you back to the My Certificate
Create screen. Click Return and check your information in the My Certificate
Create screen. Make sure that the certification authority information is correct
and that your Internet connection is working properly if you want the NWA3000-N
series AP to enroll a certificate online.
180
DESCRIPTION
When you select Create a certification request and enroll for a
certificate immediately online, the certification authority may
want you to include a reference number and key to identify you
when you send a certification request.
Fill in both the Reference Number and the Key fields if your
certification authority uses the CMP enrollment protocol. Just the
Key field displays if your certification authority uses the SCEP
enrollment protocol.
For the reference number, use 0 to 99999999.
For the key, use up to 31 of the following characters. a-zA-Z0-
9;|`~!@#$%^&*()_+\{}':,./<>=-
Click OK to begin certificate or certification request generation.
Click Cancel to quit and return to the My Certificates screen.
NWA3000-N Series User's Guide