ZyXEL Communications NWA3000-N Series User Manual page 159

12.3.2.1 Add/Edit Security Profile
This screen allows you to create a new security profile or edit an existing one. To
access this screen, click the Add button or select a security profile from the list
and click the Edit button.
Note: This screen's options change based on the Security Mode selected. Only the
default screen is displayed here.
Figure 71 SSID > Security Profile > Add/Edit Security Profile
The following table describes the labels in this screen.
Table 57 SSID > Security Profile > Add/Edit Security Profile
LABEL
Profile Name
Security Mode
802.1X
Radius Server
Type
Primary /
Secondary Radius
Server Activate
Radius Server
IP Address
Radius Server
Port
Radius Server
Secret
NWA3000-N Series User's Guide
DESCRIPTION
Enter up to 31 alphanumeric characters for the profile name. This
name is only visible in the Web Configurator and is only for
management purposes. Spaces and underscores are allowed.
Select a security mode from the list: wep, wpa, wpa2, or wpa2-
mix.
Select this to enable 802.1x secure authentication.
Select internal to use the NWA3000-N series AP's internal
authentication database, or external to use an external RADIUS server
for authentication.
Select this to have the NWA3000-N series AP use the specified
RADIUS server.
Enter the IP address of the RADIUS server to be used for
authentication.
Enter the port number of the RADIUS server to be used for
authentication.
Enter the shared secret password of the RADIUS server to be used for
authentication.
Chapter 12 AP Profile
159