ZyXEL Communications NWA3000-N Series User Manual page 297

Table 103 WLAN Logs (continued)
LOG MESSAGE
Incorrect username or
password for WPA or
WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
System internal error.
%s: STA %s could not
extract EAP-Message
from RADIUS message
Station accounting
start.
Station accounting
success.
Table 104 Account Logs
LOG MESSAGE
Account %s %s has been
deleted.
Account %s %s has been
changed.
Account %s %s has been
added.
Table 105 File Manager Logs
LOG MESSAGE
ERROR:#%s, %s
WARNING:#%s, %s
ERROR:#%s, %s
NWA3000-N Series User's Guide
DESCRIPTION
A wireless client used an incorrect WPA or WPA2 user name
or user password and failed authentication by the NWA3000-
N series AP's local user database while trying to connect to
the specified WLAN interface (first %s). The MAC address of
the wireless client is listed (second %s).
There was an error when attempting to extract the EAP-
Message from a RADIUS message. The first %s is the WLAN
interface. The second %s is the MAC address of the wireless
client.
RADIUS accounting started. If you don't receive the success
message, it may have failed.
RADIUS accounting succeeded.
DESCRIPTION
A user deleted an ISP account profile.
1st %s: profile type, 2nd %se: profile name.
A user changed an ISP account profile's options.
1st %s: profile type, 2nd %s: profile name.
A user added a new ISP account profile.
1st %s: profile type, 2nd %s: profile name.
DESCRIPTION
Apply configuration failed, this log will be what CLI command
is and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Apply configuration failed, this log will be what CLI command
is and what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Run script failed, this log will be what wrong CLI command is
and what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Appendix A Log Descriptions
297