Ssh Implementation On The Nwa3000-N Series Ap; Requirements For Using Ssh - ZyXEL Communications NWA3000-N Series User Manual

Encryption Method
2
Once the identification is verified, both the client and server must agree on the
type of encryption method to use.
Authentication and Data Transmission
3
After the identification is verified and data encryption activated, a secure tunnel
is established between the client and the server. The client then sends its
authentication information (user name and password) to the server to log in to
the server.

15.6.2 SSH Implementation on the NWA3000-N series AP

Your NWA3000-N series AP supports SSH versions 1 and 2 using RSA
authentication and four encryption methods (AES, 3DES, Archfour, and Blowfish).
The SSH server is implemented on the NWA3000-N series AP for management
using port 22 (by default).

15.6.3 Requirements for Using SSH

You must install an SSH client program on a client computer (Windows or Linux
operating system) that is used to connect to the NWA3000-N series AP over SSH.
NWA3000-N Series User's Guide
Chapter 15 System
211