ZyXEL Communications NWA3000-N Series User Manual page 291

Table 101 System Logs (continued)
LOG MESSAGE
%s becomes Zombie at
%s
DHCP Server executed
with cautious mode
enabled
DHCP Server executed
with cautious mode
disabled
Received packet is not
an ARP response packet
Receive an ARP
response
Receive ARP response
from %s (%s)
The request IP is: %s,
sent from %s
Received ARP response
NOT for the request IP
address
Receive an ARP
response from the
client issuing the
DHCP request
Receive an ARP
response from an
unknown client
In total, received %d
arp response packets
for the requested IP
address
Clear arp cache
successfully.
Client MAC address is
not an Ethernet
address
NWA3000-N Series User's Guide
DESCRIPTION
A process is present but not functioning.
1st %s: Daemon Name, 2nd %s: date and time
When memory usage exceed threshold-max, memory usage
reaches %d%% :mem-threshold-max.
When local storage usage exceeds threshold-max, %s:
Partition name file system usage reaches %d%%: disk-
threshold-max.
When memory usage drops below threshold-min, System
Memory usage drops below the threshold of %d%%: mem-
threshold-min.
When local storage usage drops below threshold-min, %s:
partition_name file system drops below the threshold of
%d%%: disk-threshold-min.
DHCP Server executed with cautious mode enabled.
DHCP Server executed with cautious mode disabled.
A packet was received but it is not an ARP response packet.
The device received an ARP response.
The device received an ARP response from the listed source.
The device accepted a request.
The device received an ARP response that is NOT for the
requested IP address.
The device received an ARP response from the client issuing
the DHCP request.
The device received an ARP response from an unknown client.
The device received the specified total number of ARP
response packets for the requested IP address.
The ARP cache was cleared successfully.
A client MAC address is not an Ethernet address.
Appendix A Log Descriptions
291