ZyXEL Communications NWA3000-N Series User Manual page 140

Chapter 11 User
To access this screen, go to the User screen, and click Add or Edit.
Figure 63 Configuration > User > User > Add/Edit A User
The following table describes the labels in this screen.
Table 49 Configuration > User > User > Add/Edit A User
LABEL
User Name
User Type
Password
Retype
Description
Authentication
Timeout Settings
140
DESCRIPTION
Type the user name for this user account. You may use 1-31
alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive. User
names have to be different than user group names, and some words
are reserved.
Select what type of user this is. Choices are:
• admin - this user can look at and change the configuration of the
NWA3000-N series AP
• limited-admin - this user can look at the configuration of the
NWA3000-N series AP but not to change it
• user - this is used for embedded RADIUS server and SNMPv3 user
access
This field is not available if you select the ext-user or ext-group-
user type.
Enter the password of this user account. It can consist of 4 - 31
alphanumeric characters.
Re-enter the password to make sure you have entered it correctly.
Enter the description of each user, if any. You can use up to 60
printable ASCII characters. Default descriptions are provided.
If you want to set authentication timeout to a value other than the
default settings, select Use Manual Settings then fill your preferred
values in the fields that follow.
), or dashes (-), but the first
_
NWA3000-N Series User's Guide