Adding Or Editing An Snmpv3 User Profile - ZyXEL Communications NWA5121-N User Manual

Table 66 Configuration > System > SNMP (continued)
LABEL
Trap
Community
Destination
SNMPv2c
Get Community
Set Community
SNMPv3
Add
Edit
Remove
#
User Name
Authentication
Privacy
Privilege
Apply
Reset

13.8.4 Adding or Editing an SNMPv3 User Profile

This screen allows you to add or edit an SNMPv3 user profile. To access this screen, click the
Configuration > System > SNMP screen's Add button or select a SNMPv3 user profile from the
list and click the Edit button.
Figure 91 Configuration > System > SNMP > Add
Chapter 13 System
DESCRIPTION
Type the trap community, which is the password sent with each trap to the SNMP
manager. The default is public and allows all requests.
Type the IP address of the station to send your SNMP traps to.
Select this to allow SNMP managers using SNMPv2c to access the NWA.
Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
Enter the Set community, which is the password for incoming Set requests from the
management station. The default is private and allows all requests.
Select this to allow SNMP managers using SNMPv3 to access the NWA.
Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The NWA confirms you want to remove it
before doing so. Note that subsequent entries move up by one when you take this action.
This the index number of an SNMPv3 user profile.
This is the name of the user for which this SNMPv3 user profile is configured.
This field displays the type of authentication the SNMPv3 user must use to connect to the
NWA using this SNMPv3 user profile.
This field displays the type of encryption the SNMPv3 user must use to connect to the
NWA using this SNMPv3 user profile.
This field displays whether the SNMPv3 user can have read-only or read and write access
to the NWA using this SNMPv3 user profile.
Click Apply to save your changes back to the NWA.
Click Reset to return the screen to its last-saved settings.
NWA5120 Series User's Guide
140