Stored Job Printing (Job Storage) - Kyocera Mita FS-1800/N User Manual

7
Set the desired 4-digit number for PIN using any numbers between 0
and 9. This number is synonymous to user ID which is required to
enter at the printer operator panel when retrieving.
8
Click the OK button. The Print dialog box is displayed again. Click
the OK button. The print job will be stored to the Microdrive without
printing.
To print, use the Private/Stored menu in the e-MPS menu at the
printer operator panel. For details, see page
Manual.

Stored Job Printing (Job Storage)

Select this if you want to store frequently needed print jobs, such as forms,
to print them later as required. The print jobs will not be deleted when the
printer is turned off.
To print, proceed as follows.
1
Browse through Windows File > Print. The Print dialog box will
displayed.
2
Click on the Name pull-down list, all the printers installed under
Windows are listed. Click the name of the printer you want to use.
3
Printing through Application Software
3-17
1-25 User's
in the
2
4