D Rtty Memory Transmission; D Automatic Transmission/Reception Setting - Icom ic-7700 Instruction Manual

4
RECEIVE AND TRANSMIT

D RTTY memory transmission

RT1 RT4 RT5
or
–
F-1 F-4 F-1

D Automatic transmission/reception setting

AUTO TX
F-6
EXIT/SET
RT8 1–4/5–8
–
F-4 F-7
EXIT/SET
RT1..RT8
F-7
Pre-set characters can be sent using the RTTY memo-
ry. Contents of the memory are set using the edit menu.
q During RTTY mode operation, push [DECODE]
to select RTTY decode screen.
w Push [TX MEM]
screen.
e Push [1–4/5–8]
push one of the function keys ([RT1]
[RT4] or [RT5]
F-4
• When no keyboard is connected, the selected memory
contents will be transmitted immediately.
• When a keyboard is connected, the memory contents
will be transmitted immediately when function key is
pushed, or transmitted after [F12] on the connected
keyboard is pressed, depending on auto transmission/
reception setting (see below).
• The transmission date, time, reception date and/or time may
be displayed in RX contents screen, depending on setting.
For your information
When an external keypad is connected, the pro-
grammed contents, RT1–RT4, can be transmitted.
See pages 2-7 and 12-16 for details.
q During RTTY mode operation, push [DECODE]
to select RTTY decode screen.
F-3
w Push [TX MEM]
screen, then push [EDIT]
memory edit screen.
• RTTY memory contents of the Channel 1 (RT1) is se-
lected.
e Push [RT1..RT8]
desired RTTY memory.
r Push [AUTO TX]
desired operating option as follow.
• AUTO TX/RX : Automatically transmits the se-
• AUTO TX
• AUTO RX
• No indication : Press [F12] on the keyboard to trans-
t Push
EXIT/SET
tion.
NOTE: The transceiver always functions in the
"AUTO TX/RX" setting when no keyboard is con-
nected.
4-16
to select RTTY memory
F-4
to select memory bank then
F-7
to [RT8]
F-1 F-4
to select RTTY memory
F-4
F-6 to select RTTY
several times to select the
F-7
F-6 several times to select the
lected memory and returns to re-
ceive after the transmission.
: Automatically transmits the se-
l e c t e d m e m o r y. To r e t u r n t o
receive, press [F12] on the key-
board.
: Press [F12] on the keyboard to
transmit the selected memory. Au-
tomatically returns to receive after
the transmission.
mit the selected memory and press
[F12] again to return to receive.
to exit RTTY memory edit condi-
F-3
to
F-1
).