Adjusting The Picture Quality (Picture Adjust) - Denon AVR-3310CI Owner's Manual

Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items
RESTORER
(Continued)
• Such compressed audio formats as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring
the sound to conditions near those of the original sound before
compression. It also corrects the sense of volume of the bass to obtain
richer sound with compressed audio signals.
• This is displayed on the GUI menu and can be set when the input source
is set to "HD Radio" or "NET/USB", or when analog signals (including
FM/AM signals) or PCM signals (fs = 44.1/48 kHz) are input.
Audio Delay 0ms ~ 200ms
While viewing video,
manually adjust the time to
• This can be set within the range of 0 to 100 ms when "Auto Lip
delay audio output.
Sync" is set to "ON" and when a TV compatible with Auto Lipsync is
connected.
• Store "Audio Delay" for each input source.
• You can also press

Main remote control
operation buttons
Setting contents
About the RESTORER function
<AUDIO DELAY>
to set.
:Displaying the menu :Moves the cursor
Cancel the menu (Up/Down/Left/Right)

Adjusting the Picture Quality (Picture Adjust)

• This can be set when the input source is DVD
With input sources other than the ones above, this can be set when "Video Select" is selected. In this
b
case, the original input source settings are called out.
• Can be set when the "Video Convert" setting (vpage 48) is "ON".
Setting items
Contrast –6 ~ +6 (0)
Adjust picture contrast.
Brightness 0 ~ +12
Adjust picture brightness.
Chroma Level –6 ~ +6 (0)
Adjust picture chroma level
(saturation).
Hue –6 ~ +6 (0)
Adjust color hue.
DNR OFF / Low / Middle / High
Reduce overall picture
noise.
Enhancer 0 ~ +12
Emphasize picture contours.
• "DNR" and "Enhancer" are each effective with HDMI output.
• The value set at "Picture Adjust" is stored in the memory individually for each input source.
:Confirm the setting
Default settings are underlined.
HDP TV SAT/CBL VCR DVR V.AUX
Setting contents
:Return to previous menu
NET/USB .