Specifications - Denon AVR-3310CI Owner's Manual
Denon avr-3310ci: user guide
Hide thumbs
Also See for AVR-3310CI:
- Service manual (211 pages) ,
- Manuel de l'utilisateur (108 pages) ,
- Owner's manual (22 pages)
Table of Contents
Advertisement
Specifications
n
Audio section
• Power amplifier
Rated output:
Front:
130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround (A + B):
130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power:
140 W x 2ch (8 Ω/ohms)
210 W x 2ch (4 Ω/ohms)
Output connectors:
Center, Surround, Surround back
Front:
• Analog
Input sensitivity / Input impedance:
200 mV / 12 kΩ/kohms (except for EXT. IN (SW, S, SB), CD, PHONO, V. AUX)
200 mV / 47 kΩ/kohms (EXT. IN (SW, S, SB), CD, PHONO, V. AUX)
Frequency response:
10 Hz ~ 100 kHz +1, –3 dB (DIRECT mode)
S/N:
102 dB (IHF–A weighted, DIRECT mode)
Distortion:
0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V
Rated output:
• Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input:
Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (A weighting, with 5 mV input)
Rated output:
150 mV
Distortion factor:
0.03 % (1 kHz, 3 V)
n
Video section
• Standard video connectors
1 Vp-p, 75 Ω/ohms
Input / output level and impedance:
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• S-Video connectors
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• Color component video connector
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
Input / output level and impedance:
P
/ C
B
P
/ C
R
Frequency response:
5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to "OFF")
6 ~ 16 Ω/ohms
A or B
6 ~ 16 Ω/ohms
A + B
8 ~ 16 Ω/ohms
signal — 0.7 Vp-p, 75 Ω/ohms
B
signal — 0.7 Vp-p, 75 Ω/ohms
R
n
HD Radio section
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
Receiving Range:
87 .5 MHz ~ 107 .9 MHz
Usable Sensitivity:
1.5 µV (14.8 dBf)
S/N (IHF-A):
MONO
STEREO 68 dB
HD
Total harmonic Distortion (at 1 kHz):
MONO
STEREO 0.2 %
HD
n
General
Power supply:
AC 120 V, 60 Hz
Power consumption:
7 .0 A
0.1 W (Standby)
434 (W) x 171 (H) x 414 (D) mm (17-3/32" x 6-47/64" x 16-19/64")
Maximum external dimensions:
Weight:
12.9 kg (28 lbs 7 oz)
n
Main remote control unit (RC-1118)
Batteries:
R6/AA Type (two batteries)
Maximum external dimensions:
52 (W) x 243 (H) x 21 (D) mm (2-3/64" x 9-9/16" x 53/64")
Weight:
184 g (Approx 6.5 oz) (including batteries))
n
Sub remote control unit (RC-1121)
Batteries:
R03/AAA Type (two batteries)
Maximum external dimensions:
49 (W) x 220 (H) x 24.5 (D) mm (1-59/64" x 8-21/32" x 31/32")
Weight:
114 g (Approx 4 oz) (including batteries)
b For purposes of improvement, specifications and design are subject to change without notice.
[FM]
[AM]
W)
-15
530 kHz ~ 1710 kHz
20 µV
78 dB
85 dB
85 dB
0.1 %
0.02 %
0.02 %
0
Hide quick links:
Advertisement
Table of Contents
