Adjusting The Picture Quality (Picture Adjust); Checking The Status (Information) - Denon AVR-890 Owner's Manual

ENGLISH

Adjusting the Picture Quality (Picture Adjust)

• This can be set when the input source is DVD
With input sources other than the ones above, this can be set when "Video Select" is selected. In this
b
case, the original input source settings are called out.
• Can be set when the "Video Convert" setting (vpage 36) is "ON" .
Setting items
Contrast –6 ~ +6 (0)
Adjust picture contrast.
Brightness 0 ~ +12
Adjust picture brightness.
Chroma Level –6 ~ +6 (0)
Adjust picture chroma level
(saturation).
Hue –6 ~ +6 (0)
Adjust color hue.
DNR OFF / Low / Middle / High
Reduce overall picture noise.
Enhancer 0 ~ +12
Emphasize picture contours.
• "DNR" and "Enhancer" are each effective with HDMI output.
• The value set at "Picture Adjust" is stored in the memory individually for each input source.
Remote control

operation buttons
Default settings are underlined.
HDP TV SAT/CBL VCR DVR V.AUX .
Setting contents
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Checking the Status
(Information)
Setting items
Status Select Source / Name / Surround Mode / Input Mode / Decode Mode /
HDMI / Digital / Component / iPod Dock / Video Select / Video Convert /
Shows information about
i/p Scaler / Resolution / Progressive Mode / Aspect
current settings.
You can also display current status on the main unit's display each time you
press on the main unit.
ZONE2
• POWER/ Select Source/ Master Volume
Audio Input Signal Surround Mode : The currently set surround mode is displayed.
Signal : The input signal type is displayed.
Shows information about
fs : The input signal's sampling frequency is displayed.
audio input signals.
Format : The number of channels in the input signal (front, surround, LFE)
is displayed.
Offset : The dialogue normalization correction value is displayed.
Flag : This is displayed when inputting signals including a surround back
channel. "MATRIX" is displayed with Dolby Digital EX and DTS-ES Matrix
signals, "DISCRETE" with DTS-ES Discrete signals.
HDMI Information HDMI Signal Information
• Resolution / Color Space / Pixel Depth
Shows information about
HDMI input signals and
HDMI Monitor Information
monitor.
• Interface / Suport Resolution
Auto Surround Mode Analog/PCM / Digital 2ch / Digital 5.1ch / Multi CH
Shows information about
auto surround mode
settings.
Quick Select Quick Select 1 / Quick Select 2 / Quick Select 3
• S elect Source / Video Select / MultEQ / Dynamic EQ / Dynamic Vol /
Shows information about
quick select settings. Analog/PCM / Digital 2ch / Digital 5.1ch / Multi CH
ZONE2 Quick Select
Z2 Quick Select 1 : Select Source / Volume Level
Z2 Quick Select 2 : Select Source / Volume Level
Z3 Quick Select 3 : Select Source / Volume Level
Preset Channel A 1 ~ G 8
• T UNER / SIRIUS
Shows information about
preset channels.
: Decision the setting
Setting contents
: Return to previous menu