Denon AVR-3310CI Owner's Manual page 39

Setting items
Front Speaker Setup Setting : Choose the method for setting the front speakers.
Normal : The front speakers are set using the
Set the front speakers to use •
for every surround mode. • Custom : The front speakers used for the different playing modes are
set in advance.
2CH DIRECT/STEREO : The front speakers used in the direct, stereo and
pure direct play modes (2 channel) are set in advance.
• A : Front speaker A is used.
• B : Front speaker B is used.
• A+B : Both front speakers A and B are used.
MULTI CH : The front speakers used in modes other than the direct, ste-
reo and pure direct play modes (2 channel) are set in advance.
• A : Front speaker A is used.
• B : Front speaker B is used.
• A+B : Both front speakers A and B are used.
NOTE
• When set to "Custom",
• The front speaker setting stored for the "Quick Select" function is given
priority.
Making the HDMI Settings (HDMI Setup)
Make settings for HDMI video/audio output.
Setting items
RGB Range Normal : Output with RGB video range (16 (black) to 235 (white)).
Enhanced : Output with RGB video range (0 (black) to 255 (white)).
Set the video range of RGB
output from the HDMI
This setting is valid when using a TV equipped with a DVI terminal.
terminal.
Auto Lip Sync ON : Compensated.
OFF : Not compensated.
Automatic compensation
for timing shift in audio and
video output.
Audio Out AMP : Playback through speakers connected to the receiver.
Select HDMI audio output TV : Playback through TV connected to the receiver.
device.
When the HDMI control function is operating, the setting of audio
playback in the connected TV takes priority (vpage 78 "HDMI
Control Function").
Main remote control
operation buttons
Setting contents
<FRONT SPEAKERS>
<FRONT SPEAKERS>
does not operate.
Default settings are underlined.
Setting contents
:Displaying the menu :Moves the cursor
Cancel the menu (Up/Down/Left/Right)
Setting items
HDMI Control ON : Use the HDMI control function.
. OFF : Do not use the HDMI control function.
External devices can be con-
trolled from the AVR-3310CI
and the AVR-3310CI can be
• Please consult the operating instructions for each connected device to
controlled from external de-
check the settings.
vices.
• For details on the HDMI control function, see "HDMI Control Function"
NOTE (vpage 78).
The HDMI control function
NOTE
controls operations of a
• When "HDMI Control" is set to "ON", it consumes more standby
TV that is compatible with
power.
the HDMI control function.
• When not using this unit for a long period, we recommend that you
Make sure that the TV and
press
HDMI are connected when
• When the "HDMI Control" setting has been changed, always turn off
you perform HDMI control.
the power to the connecting devices afterwards and then turn back on.
• The "HDMI Control" does not work when the power to the equipment
is off.
• When "HDMI Control" is set to "ON", power is supplied constantly to
the AC outlet (UNSWITCHED).
Standby Source Last : Standby with last used input source during power on.
HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 : The standby mode is set at
Set the HDMI connector for
the input source assigned to the respective.
HDMI signal input during
standby.
This can be set when "HDMI Control" is set to "ON".
Power Off Control ON : Switched.
OFF : Not switched.
The power of the AVR-
3310CI and external device
turn off together.
• This can be set when "HDMI Control" is set to "ON".
• Please consult the operating instructions for each connected device to
check the settings.
• For details on the HDMI control function, see "HDMI Control Function"
(vpage 78).
:Confirm the setting
Making Detailed Settings (Manual Setup)
Setting contents
<POWER>
to turn off (jOFF) the power.
:Return to previous menu