Restoring All The Settings To As They Were At The Time Of Purchase (Resetting The Microprocessor) - Denon AVR-3310CI Owner's Manual

GSIRIUS Satellite RadioH
Symptom Cause / Countermeasure
"CHECK SIRIUS • The SiriusConnect Home Tuner unit is not connected. Check that
TUNER" is displayed. the connections are correct.
"ANTENNA ERROR" • The antenna is not connected. Check that the connections are
is displayed. correct.
"NO SIGNAL" is • The signal cannot be received. Reposition the antenna.
displayed.
"INVALID CHANNEL" • Channel is not present. Select another channel.
is displayed.
"ACQUIRING • The signal cannot be received. Reposition your SiriusConnect
SIGNAL" is displayed. Home Tuner and Home Dock antenna.
• Displays while SiriusConnect Home Tuner is connected. Reposition
your SiriusConnect Home Tuner and Home Dock antenna.
"Call SIRIUS" z is
• Channels are not subscribed to. If you subscribe to the channel,
you can receive the channel.
displayed.
"SUBSCRIPTION • While updating contract information.
UPDATED" is
displayed.
"Enter Lock Code • Selected channels are locked. Please insert pass word (4 digits)
[ ]" is displayed. into "[ ]" .
After scroll displays "Call 888-539- .... " twice, displays "Call SIRIUS".
:
z
0
Restoring All the Settings to as They were at the
Page
Time of Purchase (Resetting the Microprocessor)
19
Perform this procedure if the display is abnormal or if operations cannot be performed.
19
When the microprocessor is reset, all the settings are reset to their default values.
–
1
Turn off the power using
–
2
Press <POWER> while simultaneously pressing
–
SIMULATION> .
– 3
Once the display starts flashing at intervals of about 1 second, release the two
buttons.
–
–
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
–
<POWER> .
<STANDARD> and <DSP