Denon AVR-3310CI Owner's Manual
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Stereo Receiver
  5. AVR-3310CI
  6. Owner's manual

Denon AVR-3310CI Owner's Manual

Denon avr-3310ci: user guide
Hide thumbs Also See for AVR-3310CI:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
AV SURROUND RECEIVER
AVR-3310CI
Owner's Manual
G
U
I
raphical
ser
nterface
Use this manual in combination with the
operating guide displayed on the GUI screen.
GUI Menu Operation (vpage 26)
GUI Menu Map (vpage 25)
Remote Control Unit Operations (vpage 86)

Advertisement

Table of Contents
loading

Related Manuals for Denon AVR-3310CI

Summary of Contents for Denon AVR-3310CI

  • Page 1 Use this manual in combination with the operating guide displayed on the GUI screen. GUI Menu Operation (vpage 26) GUI Menu Map (vpage 25) Remote Control Unit Operations (vpage 86) AV SURROUND RECEIVER AVR-3310CI Owner’s Manual...
  • Page 2 IMPOTANT SAFETY SAFETY PRECAUTIONS CAUTION: INSTRUCTIONS • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, CAUTION etc. Read these instructions. RISK OF ELECTRIC SHOCK • No naked flame sources, such as lighted candles, should be Keep these instructions.
  • Page 3 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. et la poussière. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. • Avoid high temperatures.

  • Page 4: Table Of Contents

    Operations During Playback ······················································67 Music and Videos ········································································81 Important Information ··································································9 Adjusting the Master Volume ······················································67 Operating the AVR-3310CI with a Browser Cables Used for Connections ·······················································9 Turning Off the Sound Temporarily (Muting) ·······························67 (Web Control Function) ·······························································82 Converting Input Video Signals for Output (Video Conversion Listening with Headphones ························································67...

  • Page 5: Getting Started

    Check once again that all connections are correct and that there are Assigning buttons that are Not Used to Operate Other Perform the operations leading to playback on the AVR-3310CI in the no problems with the connection cables. Devices (Punch Through Function)············································90 order shown below.

  • Page 6: Preparations

    (The In addition to the AVR-3310CI, the included main remote control unit product. supplied batteries are only for verifying operation.) (RC-1118) can also be used to operate the equipment listed below.

  • Page 7: Part Names And Functions

    GWith the door openH Part Names and Functions W7 W6 Front Panel For buttons not explained here, see the page indicated in parentheses ( ). Q9 W0 MULTEQ ® button ······································· (73) Headphones jack ········································ (67) Q8 W8 ZONE2 ON/OFF button ······························ (85) DYNAMIC VOLUME™...

  • Page 8: Display

    Part Names and Functions Display Q4 Q3 r t y Input signal indicators PARTY indicators AL24 indicator These indicators light during party mode. This lights when AL24 Processing Plus (vpage Input signal channel indicators • ORGANIZER 94) is activated. These light when digital signals are input. This lights to indicate that party mode has When playing HD Audio sources, the“...

  • Page 9: Rear Panel

    Part Names and Functions Rear Panel SIRIUS connector ······································· (19) SIGNAL GND terminal ······························· (17) COMPONENT VIDEO connectors ···(15, 16, 18) RS-232C connector ····································· (22) AC inlet ························································ (24) HDMI connectors ········································ (14) REMOTE CONTROL jacks ·························· (22) AC OUTLETS ··············································· (24) VIDEO / S-VIDEO connectors ············...

  • Page 10: Remote Control Unit

    Remote Control Unit control Power buttons ············································ (24) QUICK SELECT buttons ····························· (80) Operations on the AVR-3310CI Main Remote Control Unit (RC-1118) Input source select button ························ (27) Operations on five devices other that System buttons ······················ (67 , 68, 87 ~ 90)
  • Page 11 Part Names and Functions Sub Remote Control Unit (RC-1121) ZONE indicators ········································· (92) QUICK SELECT buttons ······················· (80, 86) Input source select buttons ······················· (91) SHIFT button ··············································· (91) Channel button (CH) ·································· (91) MENU button ········································ (25, 91) Cursor buttons (uio p) ···················· (26, 91) SEARCH button ····································...

  • Page 12: Connections

    Connections Important Information Cables Used for Connections Connections for all compatible audio and video signal formats Select the cables (sold separately) according to the equipment being connected. are described in this owner’s manual. Please select the types of connections suited for the equipment you are connecting. Audio and video cables Video cables After connections are completed, certain settings must be made on...

  • Page 13: Converting Input Video Signals For Output (Video Conversion Function)

    This function automatically converts various formats of video signals input to the AVR-3310CI into the Output Output Input format used to output the video signals from the AVR-3310CI to a monitor. (vpage 99 “Relationship (IN) (MONITOR OUT) Between Video Signals and Monitor Output”).

  • Page 14: Installing / Setting The Speakers

    Installing / Setting the Speakers When 7.1ch (Front Height Speaker) Connected When 6.1ch (Surround Back Speaker) Connected • The AVR-3310CI is compatible with various types of surround playback. Front height speakers • Decide on the surround modes to be played on...
  • Page 15 Installing/Setting the Speakers s Set the “Amp Assign” Mode According to the Speaker Layout The signals output from the AVR-3310CI’s SURR. BACK/AMP ASSIGN speaker terminals can be switched (vpage 34 “Amp Assign”). Amp assign SURR. BACK / Amp assign SURR. BACK /...

  • Page 16: Speaker Connections

    + (red) and – (black) polarities on the speakers When the “Amp Assign” setting (vpage 34) is being connected to the AVR-3310CI, and be sure to “Front A Bi-Amp” or “Front B Bi-Amp”, connect interconnect the channels and polarities correctly.

  • Page 17: Connecting Devices

    Connections Connecting Devices Connecting Devices Equipped with HDMI Terminals The AVR-3310CI allows connection of inputs from up to 5 HDMI devices and output to 1 monitor. Important Information Connecting Devices Digital Satellite Game video HD player About HDMI player receiver...

  • Page 18: Connecting The Monitor

    Connecting Devices NOTE Connecting the Monitor • If the GUI menu “Audio Out” setting (vpage 36) is set to “AMP”, the sound may be interrupted when the monitor’s power is turned off. • Select the terminal to use and connect the device. •...

  • Page 19: Connecting The Playback Components

    Connecting the Playback Components Use a DENON control dock for iPod (ASD-1R or ASD-11R, sold separately) to connect the iPod to the AVR-3310CI. For instructions on Blu-ray Disc Player / DVD Player the control dock for iPod settings, refer to the control dock for iPod’s operating instructions.

  • Page 20: Connecting The Recording Components

    “booming” noise from the speakers. NOTE Set as Necessary The SIGNAL GND terminal of the AVR-3310CI is not a safety ground Set this to change the input signal to which the input source is connection. Connect it to reduce noise when noise is excessive.
  • Page 21 Set this to change the input signal to which the input source is assigned. • To record video signals through the AVR-3310CI, use the same type of video cable for connection “Input Assign” (vpage 45) between the AVR-3310CI and the player as the cable used for connection between the AVR-3310CI and the recorder.
  • Page 22 Connecting Devices SIRIUS Connector Satellite Receiver / Cable Tuner (Set Top Box) The AVR-3310CI is a SIRIUS Satellite Radio Ready ® receiver. You can • Select the terminal to use and connect the device. receive SIRIUS ® Satellite Radio by connecting to the SiriusConnect For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI Terminals”...
  • Page 23 Positioning the Antenna from the antenna connected stable surface. For a consistent satellite signal, the antenna must be positioned to the AVR-3310CI’s other AM Direction of broadcasting station correctly. Use the following map to determine which area you are tuner terminal.

  • Page 24: Connections To Other Devices

    Connecting Devices USB Port Component with Multi-channel Output connectors Connections to Other Devices When you connect a USB memory device to the USB port, you can The video signal can be connected in the same way as a Blu-ray Disc enjoy music, etc., stored on the USB memory device.

  • Page 25: External Controller

    When using just one surround back speaker, connect it to the left terminal is connected via a monaural mini-plug, the connected Set this to use the RS-232C connector for the DENON RF remote channel (L). device’s power on/standby can be controlled through linked controller.

  • Page 26: Connecting To A Home Network (Lan)

    Connecting” (vpage 38). other sources. You can also control the AVR-3310CI from your PC via • With the AVR-3310CI, it is possible to use the DHCP and Auto IP Router the Web browser. functions to make the network settings automatically.

  • Page 27: Connecting The Power Cord

    Connecting the Power Cord Once Connections are Symbols used to indicate buttons in this manual Completed Button located on both the main unit Wait until all connections have been completed before connecting the BUTTON and the remote control unit power cord. <BUTTON>...

  • Page 28: Settings

    Settings GUI Menu Map MENU Pressing displays the GUI menu. From this menu, you can Setting items Detailed items Description Page move to various setting screens. Audio / Video Adjust Audio Adjust Adjust various audio parameters. Adjust various audio and Picture Adjust Adjust various video parameters.

  • Page 29: Gui Menu Operation

    GUI Menu Operation When a TV is connected to the AVR-3310CI, the GUI menu, sound Examples of GUI Menu Screen Displays field parameters, etc., can be displayed on the TV. This allows you to operate the AVR-3310CI and make settings on it Typical examples are described below.

  • Page 30: Selecting The Input Source

    Selecting the input source using the Source Select menu (GUI menu) • When using with an iPod connected directly to the AVR-3310CI’s USB pot, select “USB” for the input [INPUT SOURCE SELECT] w Selecting the input source using the (Main remote control unit) source.

  • Page 31: Make The Optimal Speaker Settings, And Correct The Room Acoustics (Audyssey™ Auto Setup)

    Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup) The acoustic characteristics of the connected speakers and When using Surround Back Speakers Important Information listening room are measured and the optimum settings are made GExample qH GExample wH automatically.
  • Page 32 Turn on the TV and subwoofer power. Setup Cell phones should be placed away from all audio electronics during Change the TV input to AVR-3310CI input. microphone the measurement process as Radio Frequency Interference (RFI) may cause measurement disruptions (even if the cell phone is not in Turn on the AVR-3310CI power.
  • Page 33 NOTE s Audyssey Auto Setup Preparations d Perform Audyssey Auto Setup Since “Amp Assign” of AVR-3310CI is set to “ZONE2” by default, around items indicate the default setting. audio is not output from the surround back speakers. When using the •...
  • Page 34 If you want to check another item, so repeat step 8. remeasurement or the error message still appears, it is possible When measurements that the speakers are not connected properly. Turn the AVR-3310CI Press to select “Next 1 Store”, then press...

  • Page 35: Error Messages

    • Connect the included setup microphone to the An error message is displayed if it was not possible to complete SETUP MIC jack of the AVR-3310CI. Audyssey Auto Setup due to speaker placement, the measurement • Not all speakers could be detected.

  • Page 36: Making Detailed Settings (Manual Setup)

    Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup) Making Detailed Settings Check the Measuring Results and Equalizer Type after (Manual Setup) Audyssey Auto Setup (Parameter Check) For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation”...
  • Page 37 • Small : Use of a small speaker that has inadequate playback capacity for Since “Amp Assign” of AVR-3310CI is set to “ZONE2” by default, low frequencies. audio is not output from the surround back speakers. When using the surround back speakers with MAIN ZONE, change the “Amp Assign”...
  • Page 38 Making Detailed Settings (Manual Setup) Setting items Setting contents Setting items Setting contents Bass Setting Subwoofer Mode : Select low range signals to be reproduced by Channel Level Test Tone Start : Output test tone. subwoofer. • Front L / Front Height L / Center / Front Height R / Front R / Surround Settings for subwoofer and Set the volume of the test R / S.
  • Page 39 • Custom : The front speakers used for the different playing modes are trolled from the AVR-3310CI set in advance. and the AVR-3310CI can be • Please consult the operating instructions for each connected device to controlled from external de- 2CH DIRECT/STEREO : The front speakers used in the direct, stereo and check the settings.
  • Page 40 Making Detailed Settings (Manual Setup) Setting items Setting contents Making the Audio Settings (Audio Setup) 2ch Direct/Stereo Crossover : Outputs at below set frequency, each speaker’s bass signal Default settings are underlined. output from the subwoofer. (Continued) • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / Make settings for audio playback.
  • Page 41 “ON” in the AVR-3310CI’s default settings. • If the AVR-3310CI is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. For details, consult a network administrator.
  • Page 42 / heb / hun / ita / jpn / kor / nor / pol / por / por(BR) / rus / spa / swe / tur Friendly Name Edit : The Friendly Name is the name AVR-3310CI displayed on the network. Up to 63 characters can be input. The default Friendly Name on first use is “DENON:[AVR-3310CI]”.
  • Page 43 You can set to the upper limit set with “Volume Limit” (vpage 41) . character input. • The password may not contain underscores ( _ ). Network Status : Displays up to a maximum of 10 DENON products connected on the same network. Napster Account Username / Password •...
  • Page 44 Making Detailed Settings (Manual Setup) Setting items Setting contents Making the Multi-zone Settings (Zone Setup) Volume Limit OFF : Do not set a maximum volume. Default settings are underlined. Make a setting for maximum –20dB (61) / –10dB (71) / 0dB (81) volume.
  • Page 45 • OFF : Turn display off. • Picture : Set the background to a picture (DENON logo). Tuner : Set the tuner screen display time when the input source is • Black : Set the background to black.
  • Page 46 Zone” is selected, and when the input source set to “ON” with activating Trigger Out 2. Only use this function if so instructed by a DENON serviceperson or maintenance from a DENON “When Setting for Input Source” is selected.
  • Page 47 Care of data in Internet radio, media server and USB memory device • • In the event of an update error during update or upgrade, turn the AVR-3310CI’s power off and then on Display Description again. “Update Retry” appears on the display and update restarts from the point at which update failed.

  • Page 48: Making The Input Settings (Input Setup)

    Making the Input Settings Important Information (Input Setup) About the Display of Input Sources in This Manual For details on how to select, set and cancel settings for each menu, see “GUI Menu In this manual, the names of input sources that can be set at the different items are indicated as shown Operation”...
  • Page 49 Mode” (vpage 49). The “INPUT ASSIGN” screen is displayed. • When the AVR-3310CI and monitor are connected with an HDMI cable, if the monitor is not compatible with HDMI audio signal playback, only the video signals are output to the monitor.
  • Page 50 Opt 2 Opt 3 None • If control dock for iPod is not connected to the AVR-3310CI, assignment setting of the “iPod dock” is disabled, and you can use it as a standard input source. When control dock for iPod is used as the input source, assignment of Default Yes : Reset to the defaults.
  • Page 51 When “Video Convert” is set to “OFF”, the video conversion function mode is set. does not work. In this case, connect the AVR-3310CI and TV with the Video 1 : Select mode suitable for video playback same type of cable.

  • Page 52: Input Mode

    Making the Input Settings (Input Setup) Changing the Input Mode and Decoding Mode Changing the Input Source’s Display Name (Rename) (Input Mode) Default settings are underlined. Setting items Setting contents Rename ENTER 1. Press The selectable input modes depend on the input source and “Input Assign” (vpage 45) setting. Change the display name of 2.

  • Page 53: Playback Mode

    Making the Input Settings (Input Setup) Setting the iPod with iPod Dock Playback Mode Making the Settings to Play Still Pictures (Playback Mode) (Still Picture) Default settings are underlined. This can be set for the input source for which “iPod dock” is assigned at “Input Assign” (vpage 47). This can be set when the input source is NET/USB Setting items Setting contents...

  • Page 54: Parental Lock

    Making the Input Settings (Input Setup) Setting SIRIUS Radio Reception Restrictions Giving Names to Preset Stations (Preset Name) (Parental Lock) Default settings are underlined. Setting items Setting contents A1 ~ G8 This can be set when the input source is HD Radio . •...

  • Page 55: Playback

    3310CI (vpage 16 “Control Dock for iPod”). The following describes the procedure for playing Blu-ray disc player / w Set the iPod ® in the DENON control dock for iPod. DVD player. Use the same procedure to play other components.
  • Page 56 ® functions may not operate. • DENON will accept no responsibility whatsoever for any loss of iPod z1 : When using an ASD-11R DENON control dock for iPod. data. z2 : Video may not be output, depending on the combination of ASD-1R or ASD-11R DENON control dock for iPod and iPod.

  • Page 57: Tuning In Radio Stations

    Important Information When an iPod equipped with a video function is connected to a DENON ASD-11R control dock for iPod, video files can be played in SIRIUS, XM and all related marks and logos are trademarks of Sirius About SIRIUS XM Radio the browse mode.

  • Page 58: Listening To Sirius Satellite Radio

    Symbols used to indicate buttons in this manual Press <STATUS> until “SIGNAL” appears on the Button located on both the main unit When operating SIRIUS with the AVR-3310CI via the main remote display. BUTTON [SAT TU] and the remote control unit...
  • Page 59 Tuning in Radio Stations – SIRIUS Satellite Radio Presetting Radio Channels (Preset Memory) Searching Categories Press Your favorite broadcast channels can be preset so that you can tune them in easily. Up to 56 channels can be preset. Tune in the broadcast channel you want to preset. SR001 Hits 1 Channel category CAT :...

  • Page 60: Listening To Hd Radio Stations

    Tuning in Radio Stations – HD Radio Selecting Audio Programs Listening to HD Radio Stations Symbols used to indicate buttons in this manual HD Radio includes up to 9 audio programs (HD1 to HD8 and Analog). [DEVICE SELECT 1] [DEVICE Button located on both the main unit to “MAIN/TV”...

  • Page 61: Playing Network Audio, Usb Memory Devices

    The radio station database service may be suspended without F1 ~ F8 90.1 MHz notice. G1 ~ G8 90.1 MHz • The AVR-3310CI’s Internet radio station list is created using a radio station database service (vTuner). This database service provides a list edited and created for the AVR-3310CI.
  • Page 62 Napster. This service allows users to download and play pieces Audio Layer-3) played as slide shows. The time for which each picture is displayed of music they want to hear on the AVR-3310CI. Before you can use – can be set.

  • Page 63: Listening To Internet Radio

    Press [SOURCE SELECT] to display the GUI Source • On the AVR-3310CI, folder and file names can be displayed as titles. Any characters that cannot be displayed are replaced with Select menu, then select “ ” (vpage 27). “. (period)”.
  • Page 64 The selected Internet radio station is cleared. After pressing [SHIFT] , press [CHANNEL] to select the SELECT 2] To cancel the operation without clearing the station, press registered preset number. The AVR-3310CI automatically connects to the Internet and playback begins.

  • Page 65: Playing Files Stored On A Computer

    Playing Network Audio, USB Memory Devices Playing Files Stored on USB Memory Playing Files Stored on a Computer Devices • When playing still picture (JPEG) files, files can also be selected Use this procedure to play music files, image files or playlists. using the operation described below.

  • Page 66: Listening To Napster

    GSymbolsH ! “ # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜ supply power, use the AC adapter. (Space) • It is not possible to connect and use a computer via the AVR-3310CI’s GNumbersH 0123456789 USB port using a USB cable. [NET/USB] [NET/USB] •...
  • Page 67 Listening to Napster Enter a Character Search For the Track You Want Registering Tracks in My Napster Library to Listen to Press while the track you wish to register is Press [SEARCH] playing. Select “Add to my library”, then press ENTER [1/7] Napster...

  • Page 68: Listening To Rhapsody

    Listening to Rhapsody Listening to Rhapsody After inputting the “Username” and “Password”, Symbols used to indicate buttons in this manual select “OK”, then press ENTER Playback preparation. Button located on both the main unit If the “Username” and “Password” match, the top menu for BUTTON and the remote control unit Rhapsody is displayed.
  • Page 69 Listening to Rhapsody Select the Search Mode Track Menu e Search From the Rhapsody Internet Radio Station Press during playback to display the Track Menu. to select “Rhapsody Channels”, then press [1/4] Rhapsody ENTER [1/6] Introduction Rhapsody Music Guide to select radio station, then press ENTER Search Rhapsody Channels...

  • Page 70: Operations During Playback

    Operations During Playback Symbols used to indicate buttons in this manual Button located on both the main unit BUTTON and the remote control unit Adjusting the Master Volume Switching the front speakers <BUTTON> Button only on the main unit [BUTTON] MASTER VOLUME <FRONT SPEAKERS>...

  • Page 71: To Cue To The Beginning Of A Track

    Operations During Playback To Cue to the Beginning of a Track Playing in Random Order [RANDOM] During playback, either press (to search for Press previous tracks) or (to search for subsequent : Enable random playback. tracks), or press : Disable random playback. GUI menu “Random”...

  • Page 72: Selecting The Surround Mode (Surround Mode)

    : This is displayed when the input signal is “DTS-ES Matrix 6.1” Game : This mode is suited for games. and the AVR-3310CI’s “AFDM” setting is set to “ON” z2 : This is displayed when the input signal is “DTS-ES Discrete : This is the Pro Logic playback mode. This can Pro Logic 6.1”.

  • Page 73: Direct Playback

    Sound is output from the front left and right speakers and subwoofer. The desired mode according to the program source and viewing The sound is output to the same channels as the input signal. situation can be selected from among 7 DENON original surround Playing the source (vpage 52). modes.

  • Page 74: Adjusting The Sound And Picture Quality

    Adjusting the Sound and Picture Quality (Audio/Video Adjust) For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 26). Setting items Setting contents Adjusting the Sound (Audio Adjust) Surround Parameters LFE : Adjust the low-frequency effects level (LFE). Default settings are underlined.
  • Page 75 Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Setting items Setting contents PLgx CINEMA z3 : Generate and play the surround back signals by Surround Parameters Front Height : Set the front height channel. Surround Parameters •...
  • Page 76 Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Setting items Setting contents Audyssey Settings MultEQ : Corrects both time and frequency response problems in the Audyssey Settings Dynamic EQ / Volume : OFF Dynamic EQ : ON/Volume : OFF listening area.
  • Page 77 Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Setting items Setting contents Audyssey Settings Dynamic Volume : Solves the problem of large variations in volume level Manual EQ Adjust CH : Correct the tone of each speaker. between TV, movies and other content (between quiet passages and loud (Continued) Use the graphic equalizer...

  • Page 78: Adjusting The Picture Quality (Picture Adjust)

    Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Adjusting the Picture Quality (Picture Adjust) RESTORER About the RESTORER function Default settings are underlined. (Continued) • Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal •...

  • Page 79: Checking The Status (Information)

    Checking the Status (Information) Setting items Setting contents Setting items Setting contents Quick Select 1 / Quick Select 2 / Quick Select 3 / ZONE2 Quick Select MAIN ZONE Quick Select Status / ZONE3 Quick Select Shows information about settings for MAIN ZONE. •...

  • Page 80: Other Operations And Convenient Functions

    Other Operations and Convenient Functions Other Operations Symbols used to indicate buttons in this manual <ZONE2/3 / REC SELECT> <SOURCE • To cancel, press , then turn Button located on both the main unit SELECT> until “ZONE2 SOURCE” is displayed. BUTTON Recording on an External Device and the remote control unit...

  • Page 81: Convenient Functions

    • When you want to listen to TV audio by AVR-3310CI, connect optical digital or analog audio (vpage 15 “Connecting the Monitor”). If the HDMI control function does not operate properly, check the •...

  • Page 82: Setting The Power To Standby After A Certain Amount Of Time

    <BUTTON> Button only on the main unit With this function, you can set the AVR-3310CI so that the power is Adjust the Volume of the Different Speakers [BUTTON] Button only on the remote control unit...

  • Page 83: Saving Frequently Used Settings (Quick Select Function)

    The input source automatically switches to “NET/USB” and environment that is consistently the same. DIRECT) can be played on multiple DENON products equipped with the same network audio as on the organizer is played. the Party Mode function and connected in a network.

  • Page 84: Operating A Wireless Lan-Compatible Mobile Terminal To Play Music And Videos

    Playback of the contents selected in step 1 begins. w Select a player When selecting the AVR-3310CI from the mobile terminal device, the name of the AVR-3310CI is Mobile terminal device displayed at “Friendly Name” (vpage 39 “Friendly Name Edit”).

  • Page 85: Operating The Avr-3310Ci With A Browser (Web Control Function)

    When operated from the main unit, click because address box. the screen is not updated. For example, if the IP address of AVR-3310CI is “192.168.100.33”, z8: Click to return to the top menu. enter “http://192.168.100.33”. Displayed when setting “Top Menu Link Setup” to “ON” in GExample 3H z9: Click to add a setting to the “Favorites”...

  • Page 86: Various Memory Functions

    Convenient Functions GExample 2H Setup menu screen GExample 4H PDA menu screen GExample 6H Dedicated iPod Touch screen When accessed from the iPod Touch browser, an optimized operation screen is displayed. z18: Select to operate each zone. NOTE You cannot change setup menu operations and zone name on the PDA menu screen.

  • Page 87: Playing In Zone2/Zone3 (Multi-Zone Function)

    Audio Connections (ZONE2, ZONE3) The source selected for ZONE2 is also output from the recording output connectors. The video signals of the AVR-3310CI’s ZONE2 video output terminal The audio signals of the AVR-3310CI’s ZONE2 and ZONE3 audio are played by the ZONE2 TV.

  • Page 88: Playback

    Playback Adjust the item below. Symbols used to indicate buttons in this manual Button located on both the main unit The operating procedure is the same for “q Zone Playback by Speaker Adjust the Volume BUTTON and the remote control unit Output”...

  • Page 89: Quick Select Function

    Operating the Main Remote Registering Preset Codes w Volume Level (vpage 85) Control Unit DENON and other makes of components can be operated by setting In the zone mode for which you want to operate, press the preset memory. QUICK SELECT and hold the desired until “Memory”...

  • Page 90: Operating Components

    Operating the Main Remote Control Unit iPod HD Radio (DTU) Operating Components Front [DEVIDE SELECT 1] Switch Front MAIN/TV : To operate the TV, iPod, HD Radio, SIRIUS or NET/USB DEVICE SELECT DEVICE SELECT DEVICE : To operate a Blu-ray disc player, DVD player, Digital video recorder, video deck, satellite Signal...
  • Page 91 Operating the Main Remote Control Unit SIRIUS (SAT TU) NET/USB Front Front Front DEVICE SELECT DEVICE SELECT DEVICE SELECT SHIFT ON/SOURCE Preset channel selection Play/Pause Power on / Standby Play z MEMORY Preset memory registration Stop Pause z Channel selection SHIFT Preset channel selection Stop z...
  • Page 92 Number input / Track selection z : When the punch through function (vpage BD Player DVD Player 90) is set, this functions as the button for the Default setting DENON DENON device for which punch through is set. (Preset code) (111) ＊ (121)

  • Page 93: Assigning Buttons That Are Not Used To Operate Other Devices (Punch Through Function)

    Numbers iPod, HD Radio, SIRIUS, NET/USB 0 ~ 9, +10 Number input / Track selection [6], [7] CD Player Default setting DENON Front [8], [9] Blu-ray disc Player / DVD Player (111) (Preset code) [DYNAMIC Digital Video Recorder, Video Deck...

  • Page 94: Operating The Sub Remote Control Unit

    ZONE OFF Power turned off ( b 1) • The sub remote control unit can also be used for multi-zone, so you can use it to control the AVR-3310CI from other rooms. ZONE ON Power turned on ( b 1) •...

  • Page 95: Switching Zones

    Setting the Remote ID Remote Control Unit is Used Use this procedure to select the zone to be operated by the sub When using multiple DENON AV receivers in the same room, make this (ZONE SELECT LOCK Mode) remote control unit.

  • Page 96: Other Information

    Explanation of Terms DTS Surround Dolby Pro Logic gx is a further improved version of the Dolby Pro The AVR-3310CI is equipped with a digital signal processing circuit Logic g matrix decoding technology. DTS Digital Surround that lets you play program sources in the surround mode to achieve Audio signals recorded in 2-channels are decoded to achieve a natural the same sense of presence as in a movie theater.
  • Page 97 AL24 Processing for All Channels play unprotected content. A list of revoked WM-DRM Software is sent DENON has further developed its proprietary AL24 Processing, an to your device whenever you download a license for Secure Content analog waveform reproduction technology, to support the 192 kHz from the Internet or from a PC.

  • Page 98: Surround Modes And Parameters

    Surround Surround Modes and Parameters Signals and adjustability in the different modes Channel output Parameter (default values are shown in parentheses) Surround Mode Front Surround Surround Front Height D. COMP AFDM Surround Center Subwoofer Cinema EQ. Mode Room Size Effect Level Back L/R Back PURE DIRECT, DIRECT (2ch)
  • Page 99 Surround Signals and adjustability in the different modes Parameter (default values are shown in parentheses) NEO:6 MUSIC Surround Mode Dynamic PRO LOGIC g/gx MUSIC mode only EXT. IN only Tone Control Dynamic EQ RESTORER mode only Delay Time Subwoofer Front Height MultEQ Volume (NOTE5)
  • Page 100 Surround Differences in Surround Mode Names Depending on the Input Signals Button Input signals DTS-HD DOLBY DOLBY DIGITAL MULTI CH PCM WMA (Windows LINEAR DTS-HD DOLBY DOLBY Note Media Audio) / DTS-HD DTS ES DTS ES DOLBY DOLBY DOLBY DOLBY Surround Mode ANALOG PCM /...
  • Page 101 Surround Button Input signals DTS-HD DOLBY DOLBY DIGITAL MULTI CH PCM WMA (Windows LINEAR DTS-HD DOLBY Note Media Audio) / DTS-HD DTS ES DTS ES DOLBY DOLBY DOLBY DOLBY DOLBY Surround Mode ANALOG PCM / High DOLBY DIGITAL EX MP3 / MPEG-4 Master DSCRT MTRX...
  • Page 102 Relationship Between Video Signals and Monitor Output MAIN ZONE MONITOR OUT Input Signals Output Signals GUI menu displayed Video Convert HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO Only the GUI menu ON/OFF A z2 A z2 A z2 is displayed VIDEO...

  • Page 103: Troubleshooting

    • Check the connections to the input devices and the speaker cable 13 ~ 23 Even applying • The AVR-3310CI amplifier circuit has failed. Switch off the power – from speakers. connections. power, the power and please contact the DENON service adviser.
  • Page 104 Page Symptom Cause / Countermeasure Page No picture appears. • Check the connections of the AVR-3310CI’s video output 14, 15 No sound is produced • When playing monaural audio sources, select a surround mode terminals and the TV’s input terminals.
  • Page 105 PC Application, it is registered to “My • The computer’s or router’s firewall is activated. Check the – Library”. In this way, the playlist can be played in AVR-3310CI. computer’s or router’s firewall settings. Cannot delete •...

  • Page 106: Restoring All The Settings To As They Were At The Time Of Purchase (Resetting The Microprocessor)

    GSIRIUS Satellite RadioH Restoring All the Settings to as They were at the Symptom Cause / Countermeasure Page Time of Purchase (Resetting the Microprocessor) “CHECK SIRIUS • The SiriusConnect Home Tuner unit is not connected. Check that TUNER” is displayed. the connections are correct.

  • Page 107: Specifications

    Specifications Audio section HD Radio section [FM] [AM] • Power amplifier (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10 Rated output: Front: Receiving Range: 87 .5 MHz ~ 107 .9 MHz 530 kHz ~ 1710 kHz 130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) Usable Sensitivity: 1.5 µV (14.8 dBf) 20 µV...
  • Page 108 Scott 012, 030, 038, 039, 116, 139 Dell 012, 032 Initial Noshi Sears 010, 012, 029, 039, 088, 155 Alleron Denon Innova America Action DiamondVision Insignia 029, 108, 109, 110 Olevia 064, 072, 078 015, 016, 017, 044, 070, Ampro...
  • Page 109 061, 076, 142 Shinsonic Blu-ray Disc Player Harman/Kardon 082, 140 Philips Viking Sonic Blue Hitachi Polaroid Denon 000, 001, 002, 003, 004, Viore Hiteker Sony 005, 006 ,045, 065, 066, Vizio 061, 093, 094, 095, 126, 144 105, 106, 107 Sansui...
  • Page 110 052, 053, 054 Magnavox Linksys Microsoft Stack Panasonic Media Center PC Dell Mind 014, 032 Toshiba Microsoft Denon Minolta 008, 010, 021, 022, 032, Sylvania 033, 046, 055 Mind DIRECTV Mitsubishi 010, 038 Symphonic 008, 021, 022, 033 DEVICE SELECT : SAT/CBL...
  • Page 111 AT&T Realistic California Audio Bell South Recoton Labs Cable Vision Regal Carver 040, 041 Cabletenna Regency Denon 001, 042, [111] Cableview Rembrandt Clearmaster Runco DMX Electronics ClearMax Samsung 008, 034, 042 Dynamic Bass Colour Voice 001, 002, 003, 007, 012,...
  • Page 112 Denon Brand Company, D&M Holdings Inc. Printed in China 5411 10342 003D...

Table of Contents