Denon AVR-3310CI Owner's Manual page 56

Playing Components
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
ENTER <STATUS>
<ON/STANDBY>
uio p
[OFF]
[iPod]
[1]
ENTER
uio p
[SEARCH]
Front

4
Press [SEARCH]
more to select the display mode.
BUTTON
There are two modes for display the contents recorded on the
b
<BUTTON>
iPod.
[BUTTON]
Browse mode
This is the mode for displaying the iPod information on the GUI
screen to operate the iPod. In this mode, you cannot perform
operations directly on the iPod itself.
z With the AVR-3310CI's display, only English letters and
�
numbers and certain symbols can be displayed. Any characters
that cannot be displayed are replaced with ". (period)".
Remote mode
This is the mode for performing operations directly on the iPod
itself while watching the screen displayed on the iPod. In this
mode, the GUI screen is not displayed.
z "Remote iPod" appears on the main unit's display.
Display mode
Audio file
Playable
Picture file
files
Video file
Remote
[iPod]
control unit
Active
(AVR-3310CI)
buttons
iPod ®
z1 : When using an ASD-11R DENON control dock for iPod.
z2 : Video may not be output, depending on the combination of
ASD-1R or ASD-11R DENON control dock for iPod and iPod.
5
Use to select the item, then press
ui
to select the file to be played.
6
Press [1], ENTER
Playback starts.
7
Adjust the items below.
n Adjusting the master volume
Selecting the surround mode
n
n Adjusting the Sound and Picture Quality
Rear
(vpage 71)
and hold it down for a 2 seconds or
:
:
Browse mode Remote mode
S S
z2
A S
z1 z2
S S
S S
A S
ENTER or
p
or .
p
(vpage 67)
(vpage 69)
To stop
n
(vpage 67)
Stopping playback temporarily
n
Fast-forwarding or fast-reversing
n
To cue to the beginning of a track
n
Playing repeatedly
n
(vpage 68)
Shuffling playback
n
(vpage 68)
Searching pages
n
(vpage 68)
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound
(vpage 74). The default setting is "Mode 3".
• The title name, artist name and album name can be checked by
<STATUS>
pressing during playback.
• The time (default : 30 sec) for which the GUI menus are displayed
can be set at "GUI" – "iPod" (vpage 42). Press
return to the original screen.
[OFF] <ON/STANDBY>
• Press or and set the AVR-3310CI's power to
the standby mode before disconnecting the iPod. Also switch the
input source to one to which the menu "iPod" is not assigned before
disconnecting the iPod.
NOTE
• Depending on the type of iPod and the software version, some
functions may not operate.
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
(vpage 67)
(vpage 67)
(vpage 68)
uio p
to